[3D SYNC MODE]Items set in [3D SYNC1]Items set in [3D SYNC2]
[OFF]Not used.Not used.
[1]3D trigger outputStereo synch output
[2]3D trigger output3D trigger output
[3]Stereo synch inputThrough 3D SYNC1
[4]Stereo synch inputStereo synch output
[5]Stereo synch input3D trigger output
[6]Frame synch inputThrough 3D SYNC1
[7]Frame synch inputStereo synch output
[8]Frame synch input3D trigger output
[9]3D trigger outputFrame synch output
[10]Stereo synch outputFrame synch output
[11]3D IR TRANSMITTER (+) output3D IR TRANSMITTER (
-
) output
6) When [1], [4], [7], or [10] is selected, press as to select [STEREO SYNC OUTPUT DELAY], and press
qw to set the amount of delay output.
[0us] - [25000us]Allows you to set in increments of 10 us.
fTo synchronize multiple projectors to display 3D images, use a frame synch input and output.
Select [9] or [10] for the rst projector.
Select [6], [7], or [8] for the second and subsequent projectors.
fStereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the right eye.
f“H” is output to the 3D image display and “L” is output to the 2D image display from the terminal for which 3D trigger output is selected.
Note
f[11] or [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic is used with the projector. Consult your dealer
regarding the connection method.
[3D SIMUL INPUT SETTING]
Set this item to input and use 3D video signals of the simultaneous system.
1) Press as to select [3D SIMUL INPUT SETTING].
2) Press the <ENTER> button.
fThe [3D SIMUL INPUT SETTING] screen is displayed.
3) Press as to select [LEFT:RGB1 RIGHT:RGB2] or [LEFT:HDMI RIGHT:DVI-D].
4) Press qw to switch the setting.
[OFF]Does not display 3D images of the simultaneous system.
[AUTO]Displays 3D images of the simultaneous system.
Note
fWhen set to [AUTO], 3D images are displayed when the same 3D compatible signals are entered to each input. However, the P IN P status
during P IN P is maintained.
fThis may not function properly for some connected external devices.
fCertain signals may not function properly.
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1) Press as to select [3D INPUT FORMAT].
2) Press the <ENTER> button.
fThe [3D INPUT FORMAT] screen is displayed.
3) Press as to select a 3D format.
[AUTO]
*1
Automatically detects 3D format of input image signals and displays images.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0