Panasonic PT-DX100EWJ manual

Panasonic PT-DX100EWJ
6.9 · 1
PDF manual
 · 190 pages
English
manualPanasonic PT-DX100EWJ

Chapter 4Settings — [ADVANCED MENU] menu

ENGLISH - 87

15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH]

16) Press qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.

f When PT-DZ870E is used, proceed to Step 17).
f When PT-DW830E or PT-DX100E is used, proceed to Step 19).

17) Press as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONE

AREA], or [RIGHT KEYSTONE AREA].

18) Press qw to adjust the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] and [BLACK

BORDER LEVEL].

19) Press as to select [BLACK BORDER LEVEL].

20) Press the <ENTER> button.

f The [BLACK BORDER LEVEL] screen is displayed.
f If [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE] can be adjusted individually.

21) Press as to select an item, and press qw to adjust the setting.

[BLACK BORDER WIDTH] (Right)
Projection range Edge blending [WIDTH] (Right)
[MARKER] (Red)
Edge blending [START] (Right)
([MARKER] (Green))
[BLACK BORDER LEVEL]
[OVERLAPPED BLACK LEVEL] (Right)
[NON-OVERLAPPED BLACK LEVEL]
Note
f [BRIGHTNESS ADJUST] is a function that makes the increased brightness in black level of the overlapping image area difcult to notice
when [EDGE BLENDING] is used to congure multiple screens. The optimal point of correction is set by adjusting [NON-OVERLAPPED
BLACK LEVEL] so the black level of the overlapping image area will be the same level as the non-overlapping area. If the border area of the
part where the image is overlapping and the non-overlapping part gets brighter after adjusting [NON-OVERLAPPED BLACK LEVEL], adjust
the width of the top, bottom, left, or right. Adjust [BLACK BORDER LEVEL] when the width adjustment makes only the border area darker.
f The joining part may look discontinuous depending on the position you are looking from when a screen with high gain or rear screen is used.
f When conguring multiple screens using both horizontal and vertical edge blending, adjust [OVERLAPPED BLACK LEVEL] rst before
making adjustments in Step 12). Adjustment method is same as the procedure of [NON-OVERLAPPED BLACK LEVEL].
f If only horizontal or vertical edge blending is used, set all items in [OVERLAPPED BLACK LEVEL] to 0.
f [AUTO TESTPATTERN] settings change together with the [AUTO TESTPATTERN] of [COLOR MATCHING].
f Adjustment of the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] and [BLACK BORDER LEVEL] is a function to perform
the adjustment of [GEOMETRY(2D)] (x page 80) together with the edge blending. If [NON-OVERLAPPED BLACK LEVEL] is tilted by
correcting the keystone distortion from [KEYSTONE] in [GEOMETRY(2D)], perform Steps 17)18) to adjust the edge blending according to
the shape of [NON-OVERLAPPED BLACK LEVEL].
f When the keystone is corrected with [KEYSTONE(3D)], the edge blending cannot be adjusted together. (Only for PT-DZ870E)
f When the keystone is corrected with [KEYSTONE], the edge blending cannot be adjusted together. (Only for PT-DW830E, PT-DX100E)

[FRAME RESPONSE]

Set image frame delay.

1) Press as to select [FRAME RESPONSE].

2) Press qw to switch the item.

f The items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1
Simplies the image processing to reduce image frame delay.
[FIXED]
*2
Sets image frame delay to be constant regardless of the image position or magnication.
*1 When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only when movie-based signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f When [FRAME RESPONSE] is set to [FAST], picture quality deteriorates. Also, [DIGITAL CINEMA REALITY] cannot be set.
f [FRAME RESPONSE] cannot be set during P IN P.

Manual

View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DX100EWJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DX100EWJ.

General
BrandPanasonic
ModelPT-DX100EWJ | PT-DX100EWJ
Productvideo projector
EAN5025232738670
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness10000 ANSI lumens
Projection technologyDLP
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)10000:1
Native aspect ratio4:3
Matrix size0.7 "
Screen size compatibility50 - 600 "
Projection distance- m
Uniformity90 %
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 100 kHz
Keystone correction, vertical-40 - 40 °
Design
Product typeCeiling / Floor mounted projector
Product colorWhite
LED indicatorsYes
Housing materialPlastic
PlacementCeiling, Floor
Power
Power sourceAC
Power consumption (typical)1030 W
Power consumption (standby)3 W
AC input voltage120 - 240 V
AC input frequency50 - 60 Hz
Display
Built-in display-
Video
Full HDNo
3DYes
3D ReadyYes
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Supported 3D formatsFrame packing, Side by side, Top and bottom
Lens system
Focal length range25.6 - 35.7 mm
Aperture range (F-F)1.7 - 1.9
Throw ratio1.8 - 2.5:1
Light source
Lamps quantity2 lamp(s)
Lamp power420 W
Lamp typeUHM
Service life of light source3000 h
Light source typeLamp
Features
Dot clock scanning frequency162 MHz
HDCPYes
Noise level40 dB
Noise level (economic mode)35 dB
Network
Smart TVNo
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN (RJ-45) ports1
Weight & dimensions
Width498 mm
Depth556 mm
Height200 mm
Weight18300 g
Packaging content
Handheld remote controlYes
Remote control typeWireless/Wired
Batteries includedYes
Cables includedAC
Resource CDYes
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 80 %
Storage
Card reader integratedNo
Optical disc player typeNot included
Ports & interfaces
BNC input ports7
S-Video inputs quantity-
Audio (L/R) in0
USB 2.0 ports quantity0
DVI portYes
Component video (YPbPr/YCbCr) in1
Composite video in1
HDMI ports quantity1
VGA (D-Sub) ports quantity1
AC (power) inYes
Serial interface typeRS-232
Other features
RS-232 ports2
Multimedia
Built-in speaker(s)-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DX100EWJ below.

What is the weight of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a weight of 18300 g.

What is the height of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a height of 200 mm.

What is the width of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a width of 498 mm.

What is the depth of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a depth of 556 mm.

Is the manual of the Panasonic PT-DX100EWJ available in English?

Yes, the manual of the Panasonic PT-DX100EWJ is available in English .

Is your question not listed? Ask your question here

No results