Blanking correctionItemOperationAdjustmentRange of adjustment
Top of the screen[UPPER]
Press the q
button.
The blanking zone
moves upward.
PT-DZ870E: Top to bottom
0 - 599
PT-DW830E: Top to bottom
0 - 399
PT-DX100E: Top to bottom
0 - 383
Press the w
button.
The blanking zone
moves downward.
Bottom of the
screen
[LOWER]
Press the w
button.
The blanking zone
moves upward.
Press the q
button.
The blanking zone
moves downward.
Left side of the
screen
[LEFT]
Press the w
button.
The blanking zone
moves to the right.
PT-DZ870E: Left to right
0 - 959
PT-DW830E: Left to right
0 - 639
PT-DX100E: Left to right
0 - 511
Press the q
button.
The blanking zone
moves to the left.
Right side of the
screen
[RIGHT]
Press the q
button.
The blanking zone
moves to the right.
Press the w
button.
The blanking zone
moves to the left.
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when there is a ickering image or smeared outlines.
1) Press as to select [INPUT RESOLUTION].
2) Press the <ENTER> button.
fThe [INPUT RESOLUTION] screen is displayed.
3) Press as to select [TOTAL DOTS], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], and press
qw to adjust each item.
fValues corresponding to the signal being input are displayed automatically for each item. Increase or decrease the displayed values
and adjust to the optimal point viewing the screen when there are vertical stripes or sections are missing from the screen.
Note
fPreviously mentioned vertical banding will not occur with all white signal input.
fThe image may be disrupted while performing the adjustment, but it is not a malfunction.
f[INPUT RESOLUTION] can be adjusted only when an RGB signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.
fCertain signals may not be adjustable.
[CLAMP POSITION]
You can adjust the optimal point when the black part of the image is blunt or it has turned green.
1) Press as to select [CLAMP POSITION].
2) Press qw to adjust.
StatusRough guide for optimal valueRange of adjustment
The black part is blunt.
The point where bluntness of the black part improves the most is
the optimal value.
1 - 255
The black part is green.
The point where the green part becomes black, and the bluntness
has improved is the optimal value.
Note
f[CLAMP POSITION] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.
fCertain signals may not be adjustable.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0