[INTERNAL]Enlarges the size within the aspect range set with [SCREEN FORMAT].
[FULL]Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].
5) Press as to select [INTERLOCKED].
6) Press qw to switch the item.
[OFF]Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON]
Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the
same magnication.
7) Press as to select [VERTICAL] or [HORIZONTAL].
fIf [ON] is selected, select [BOTH].
8) Press qw to adjust.
Note
fWhen [ASPECT] is not set to [DEFAULT], [MODE] is not displayed.
[CLOCK PHASE]
You can adjust to achieve an optimal image when there is a ickering image or smeared outlines.
1) Press as to select [CLOCK PHASE].
2) Press qw or the <ENTER> button.
fThe [CLOCK PHASE] individual adjustment screen is displayed.
3) Press qw to adjust.
fAdjustment value will change between [0] and [+31]. Adjust so that the amount of interference is at a minimum.
Note
fCertain signals may not be adjustable.
fOptimal value may not be achieved if the output from the input computer is unstable.
fOptimal value may not be achieved when there is a shift in the total dot numbers.
f[CLOCK PHASE] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.
f[CLOCK PHASE] cannot be adjusted when a digital signal is input.
fIf you press w while the adjustment value is [+31], the value will become [0]. If you press q while the adjustment value is [0], the value will
become [+31].
[GEOMETRY(2D)]
(Only for PT-DZ870E)
You can correct various types of distortion in a projected image.
Unique image processing technology enables projection of a square image on a special screen shape.
1) Press as to select [GEOMETRY(2D)].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[OFF]Does not perform geometric adjustment.
[KEYSTONE]Adjusts any trapezoidal distortion in the projected image.
[CORNER CORRECTION]Adjusts any distortion in the four corners of the projected image.
[CURVED]Adjusts any curved distortion in the projected image.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0