Panasonic PT-DX100EWJ manual

Panasonic PT-DX100EWJ
6.9 · 1
PDF manual
 · 190 pages
English
manualPanasonic PT-DX100EWJ
Chapter 4Settings — [POSITION] menu

ENGLISH - 79

[VID AUTO]
*1
The projector identies the video ID (VID) embedded in the video signals and displays the image by
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC
signals.
[AUTO]
*2
The projector identies the video ID (VID) embedded in the video signals and displays the image by
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p
signals.
[THROUGH] Displays images without changing the resolution of the input signals.
[16:9]
Displays images with the aspect ratio converted to 16:9 when standard signals are input
*3
. Display
images without changing the aspect ratio when wide-screen signals are input
*4
.
[4:3]
Displays images without changing the aspect ratio when standard signals are input
*3
. Displays images
without changing the aspect ratio so that the images will t in the 4:3 screen when wide-screen
signals are input
*2
.
[H FIT]
Displays images using the entire width of the screen. When signals have the aspect ratio vertically
longer than the aspect ratio of the screen selected in [SCREEN FORMAT], the images are displayed
with the top and bottom parts cut off.
[V FIT]
Displays images using the entire height of the screen range selected in [SCREEN FORMAT]. When
signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in
[SCREEN FORMAT], the images are displayed with the right and left parts cut off.
[HV FIT]
Displays images in the entire screen range selected in [SCREEN FORMAT]. When the aspect ratio of
the input signals differs from that of the screen range, the images are displayed with the aspect ratio
converted to that of the screen selected in [SCREEN FORMAT].
*1 For video signals and Y/C signals (NTSC) only
*2 For RGB (480i or 480p) signal input only
*3 Standard signals are input signals with an aspect ratio of 4:3 or 5:4.
*4 Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.
Note
f Some size modes are not available for certain types of input signals. [DEFAULT] cannot be selected for video signal, Y/C signal (NTSC), or
RGB (480i, 480p) signal.
f If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.
Be careful of this when selecting the aspect ratio.
f If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratio
adjustment and zoom function.
f If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the images may not
be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the original format intended by the
creator of the images.

[ZOOM]

You can adjust the image size.

When [ASPECT] is set to other than [DEFAULT] and [THROUGH]

1) Press as to select [ZOOM].
2) Press the <ENTER> button.
f The [ZOOM] screen is displayed.
3) Press as to select [INTERLOCKED].
4) Press qw to switch the item.
[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON]
Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the
same magnication.
5) Press as to select [VERTICAL] or [HORIZONTAL].
f If [ON] is selected, select [BOTH].
6) Press qw to adjust.
Note
f When [ASPECT] is set to [THROUGH], [ZOOM] cannot be adjusted.

Manual

View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DX100EWJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DX100EWJ.

General
BrandPanasonic
ModelPT-DX100EWJ | PT-DX100EWJ
Productvideo projector
EAN5025232738670
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness10000 ANSI lumens
Projection technologyDLP
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)10000:1
Native aspect ratio4:3
Matrix size0.7 "
Screen size compatibility50 - 600 "
Projection distance- m
Uniformity90 %
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 100 kHz
Keystone correction, vertical-40 - 40 °
Design
Product typeCeiling / Floor mounted projector
Product colorWhite
LED indicatorsYes
Housing materialPlastic
PlacementCeiling, Floor
Power
Power sourceAC
Power consumption (typical)1030 W
Power consumption (standby)3 W
AC input voltage120 - 240 V
AC input frequency50 - 60 Hz
Display
Built-in display-
Video
Full HDNo
3DYes
3D ReadyYes
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Supported 3D formatsFrame packing, Side by side, Top and bottom
Lens system
Focal length range25.6 - 35.7 mm
Aperture range (F-F)1.7 - 1.9
Throw ratio1.8 - 2.5:1
Light source
Lamps quantity2 lamp(s)
Lamp power420 W
Lamp typeUHM
Service life of light source3000 h
Light source typeLamp
Features
Dot clock scanning frequency162 MHz
HDCPYes
Noise level40 dB
Noise level (economic mode)35 dB
Network
Smart TVNo
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN (RJ-45) ports1
Weight & dimensions
Width498 mm
Depth556 mm
Height200 mm
Weight18300 g
Packaging content
Handheld remote controlYes
Remote control typeWireless/Wired
Batteries includedYes
Cables includedAC
Resource CDYes
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 80 %
Storage
Card reader integratedNo
Optical disc player typeNot included
Ports & interfaces
BNC input ports7
S-Video inputs quantity-
Audio (L/R) in0
USB 2.0 ports quantity0
DVI portYes
Component video (YPbPr/YCbCr) in1
Composite video in1
HDMI ports quantity1
VGA (D-Sub) ports quantity1
AC (power) inYes
Serial interface typeRS-232
Other features
RS-232 ports2
Multimedia
Built-in speaker(s)-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DX100EWJ below.

What is the weight of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a weight of 18300 g.

What is the height of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a height of 200 mm.

What is the width of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a width of 498 mm.

What is the depth of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a depth of 556 mm.

Is the manual of the Panasonic PT-DX100EWJ available in English?

Yes, the manual of the Panasonic PT-DX100EWJ is available in English .

Is your question not listed? Ask your question here

No results