Other movie-based signalsSelect [AUTO], [RGB], or [YP
B
P
R
].
<SDI IN> terminal (Only for
PT-DZ870E)
Select [AUTO], [480i YC
B
C
R
], [576i YC
B
C
R
], [720/50p YP
B
P
R
], [720/60p YP
B
P
R
], [1035/60i YP
B
P
R
],
[1080/24p YP
B
P
R
], [1080/24sF YP
B
P
R
], [1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
], [1080/50i YP
B
P
R
],
[1080/60i YP
B
P
R
], [1080/50p YP
B
P
R
], [1080/60p YP
B
P
R
], [1080/24p RGB], [1080/24sF RGB],
[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], or [1080/60i RGB].
4) Press the <ENTER> button.
Note
fRefer to “List of compatible signals” (x page 178) for the types of video signals that can be used with the projector.
fThis may not function properly for some connected external devices.
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
fRefer to [COLOR MATCHING] (x page 95).
2) Display the [PICTURE] menu.
fRefer to “[PICTURE] menu” (x page 71).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
fsRGB is available for RGB signal input only.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0