Review the following points. For details, see the corresponding pages.
ProblemsPoints to be checkedPage
Power does not turn on.
fIs the power plug rmly inserted into the outlet?―
fIs the <MAIN POWER> switch set to <OFF>?57
fIs the wall outlet supplying electricity?―
fHave the circuit breakers tripped?―
fAre the lamp indicator <LAMP1>/<LAMP2> or the temperature indicator <TEMP> lit
or ashing?
157
fIs the lamp unit cover attached?162
No image appears.
fAre connections to external devices correctly performed?49
fIs the input selection setting correct?62
fIs the [BRIGHTNESS] adjustment setting at a minimum?71
fIs the external device that is connected to the projector working properly?―
fIs the shutter function in use?61
fIf the power indicator <ON (G)/STANDBY (R)> is ashing in red, consult your
dealer.
―
fIs the lens cover still attached to the lens?55
Image is fuzzy.
fIs the lens focus set correctly?58
fIs the projection distance appropriate?33
fIs the lens dirty?19
fIs the projector installed perpendicular to the screen?―
Color is pale or grayish.
fIs [COLOR] or [TINT] adjusted correctly?72
fIs the external device connected to the projector adjusted correctly?49
fIs the RGB cable damaged?―
Remote control does not
respond.
fAre the batteries depleted?―
fIs the polarity of the batteries set correctly?29
fAre there any obstructions between the remote control and the remote control
signal receiver of the projector?
25
fIs the remote control being used beyond its effective operation range?25
fAre other forms of light, such as uorescent light, affecting the projection?25
fIs the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
131
fIs the <REMOTE 2 IN> terminal used for contact control?176
fIs the ID number setting operation correct?29
Menu screen does not
appear.
fIs the on-screen display function turned off (hidden)?101
Buttons on the control
panel do not operate.
fIs the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
131
fIs the <REMOTE 2 IN> terminal used for contact control?176
Image does not display
correctly.
fIs the [SYSTEM SELECTOR] selection set correctly?76
fIs there a problem with the video tape or other image sources?―
fIs a signal which is not compatible with the projector being input?178
Image from a computer
does not appear.
fIs the cable too long? (Use D-Sub cables that are 10 m (32'10") or shorter.)―
fIs the external video output on the laptop computer set correctly? (Ex.: The
external output settings may be switched by pressing “Fn” + “F3” or “Fn” + “F10”
simultaneously. Since the method varies depending on the computer type, refer to
the user manual provided with your computer.)
―
Image output from DVI-D
of the computer does not
appear.
fIs the [DVI-D IN] setting [EDID3] or [EDID2:PC]?98
fThe graphics accelerator driver of the computer may need to be updated to the
latest version.
―
fThe computer may need to be restarted after performing the [DVI-D IN] setting.98
Video from HDMI
compatible device does
not appear or it appears
jumbled.
fIs the HDMI cable connected securely?49
fTurn the power of the projector and the external device on and off.―
fIs a signal which is not compatible with the projector being input?178
Cannot control the
projector with Art-Net.
fAre the connections between the twisted-pair-cable transmitter and the projector or
an external device correctly done?
―
fIs the [Art-Net] setting [ON]?―
fAre the [PORT ADDRESS] and [START ADDRESS] settings correct?―
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0