Remove the air lter beforehand with the previously described procedure of “Removing the air lter”.
1) Clean the air filter.
fVacuum dust from the air lter with a vacuum cleaner.
Attaching the air lter
Fig. 1
Air filter (to the lamp unit 2)
Air filter case
Air filter (to the lamp unit 1)
1) Attach the air filter. (Fig. 1)
fInsert the air lter to the lter case rib securely.
2) Attach the air filter case to the projector.
fPush in the air lter case securely until the clicking sound is made.
3) Attach the lamp unit cover.
fClose the lamp unit cover in the reverse order of Step 1) of “Removing the air lter”.
fAttach the lamp unit cover so that the connector of the lamp unit cover is inserted to the fan power connector securely.
fUse a Phillips screwdriver to rmly tighten the lamp unit xing screw (x1).
fMake sure to attach the lamp unit cover securely.
Note
fMake sure that the air lter case is properly attached before using the projector. If it is not properly attached, the projector will suck in dirt
and dust causing a malfunction.
fIf you use the projector without attaching the air lter case, the lter indicator <FILTER> ashes in red and the message appears on the
projection screen for approximately 30 seconds.
fDo not use water when washing the air lter. Washing with water may decrease the dust absorption capability.
fWhen the dust remains after cleaning, it is time to replace the air lter.
The air lter for replacement (TMZX5209) is an optional accessory (service part). To purchase the product, consult your dealer.
One air lter is provided for the optional Replacement lamp unit (Model No.: ET-LAD120 (1 pc)), and two air lters are provided for the
optional Replacement lamp unit (Model No.: ET-LAD120W (2 pcs)).
Replacing the unit
Lamp unit
The lamp unit is a consumable component. Refer to “When to replace the lamp unit” (x page 161) for details about the replacement cycle.
When purchasing the optional accessory of Replacement lamp unit (Model No.: ET-LAD120 (1 pc), ET-LAD120W (2 pcs)), consult your dealer.
It is recommended that you request a qualied technician to replace the lamp unit. Consult your dealer.
Warning
Replace the lamp unit after the lamp has cooled (after waiting at least one hour).
The high temperature inside the cover will cause burns.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0