On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[AUTO]Switches the communication method automatically to DIGITAL LINK or Ethernet.
[DIGITAL LINK]Fixes the communication method to DIGITAL LINK.
[ETHERNET]Fixes the communication method to Ethernet.
Possible communication modes
Setting
Communication possible
Image transmissionEthernetRS-232C
[AUTO]
For DIGITAL LINK
lll
For Ethernet―
l
―
[DIGITAL LINK]
lll
[ETHERNET]―
l
―
l: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method of DIGITAL LINK.
When the projector is connected directly via Ethernet
1) Press as to select [DIGITAL LINK SETUP].
2) Press the <ENTER> button.
fThe [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(ETHERNET)].
4) Press qw to switch the communication method.
fThe items will switch each time you press the button.
[AUTONEGOTIATION]The communication method is set automatically.
[100BaseTX-Full]Full duplex communication method is set.
[100BaseTX-Half]Half-duplex communication method is set.
5) Press as to select [STORE].
6) Press the <ENTER> button.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0