On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.
fWhen the projector is used for the rst time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
fAfter selecting the item, press asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
fWhen the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
fThe entered password is displayed with*marks on the screen.
fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be
restricted to the power standby <v> button, the <SHUTTER> button, and the <LENS> (<FOCUS>, <ZOOM>, and <SHIFT>) buttons.
1) Press as to select [SECURITY PASSWORD].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[OFF]Disables the security password entry.
[ON]Enables the security password entry.
Note
fIn the factory default setting of after [ALL USER DATA] in [INITIALIZE] (x page 123) is executed, the [SECURITY PASSWORD] setting is
set to [OFF].
fChange the password periodically that is hard to guess.
fThe security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press as to select [SECURITY PASSWORD CHANGE].
2) Press the <ENTER> button.
fThe [SECURITY PASSWORD CHANGE] screen is displayed.
3) Press asqw and the number (<0> - <9>) buttons to set the password.
fUp to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
Note
fThe entered password is displayed with*marks on the screen.
fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0