[SIGNAL FREQUENCY]Displays the frequency of the input signal.
[PROJECTOR RUNTIME]Displays the operation times of the projector.
[LAMP1]
*2
Displays the runtime and status of Lamp 1.
[LAMP2]
*2
Displays the runtime and status of Lamp 2.
[INTAKE AIR TEMP.]Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]Displays the status of the internal temperature of the projector.
[AROUND LAMP TEMP.]Displays the status of the temperature around the lamps of the projector.
[PROJECTOR TYPE]Displays the type of the projector.
[SERIAL NUMBER]Displays the serial number of the projector.
[LAMP UNIT MODEL NO.]Displays the model no. of the lamp unit.
[LAMP1 SERIAL NUMBER]Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER]Displays the serial number of the lamp 2.
[MAIN VERSION]Displays the main version of the rmware of the projector.
[SUB VERSION]Displays the sub version of the rmware of the projector.
[UPGRADE(ET-UK20)]
*1
Displays the activation status based on the Upgrade Kit.
[ON COUNT]
[POWER ON TIMES]Displays the number of times the power is turned on.
[LAMP1 ON]
Displays the number of times the lamp is turned on.
[LAMP2 ON]
[SHUTTER]Displays the number of times the shutter is closed.
[LAMP1]Displays runtime in detail.
[LAMP2]Displays runtime in detail.
[NUMBER OF REGISTERED
SIGNAL]
Displays the number of registered signals.
[REMOTE2 STATUS]Displays the control status of the REMOTE2.
[AC VOLTAGE]Displays the status of the AC voltage.
[COOLING CONDITION]Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.
[SIGNAL INFORMATION]
[MEMORY NO.]Displays the memory number of the input signal.
[INPUT]Displays the input terminal currently selected.
[SIGNAL NAME]Displays the input signal name.
[SIGNAL FREQUENCY]Displays the frequency of the input signal.
[SYNC.STATE]Displays the synch polarity of the input signal.
[V.SYNC WIDTH]Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE]Displays the scan type of the input signal.
[TOTAL DOTS]Displays the total dot count of the input signal.
[DISPLAY DOTS]Displays the number of input signal display dots.
[TOTAL LINES]Displays the total line count of the input signal.
[DISPLAY LINES]Displays the number of input signal display lines.
[SAMPLING]Displays the sampling information of the input signal.
[SIGNAL LEVEL]Displays the signal level of the input signal.
[BIT DEPTH]
*1
Displays the gradation of the input signal.
*1 Only for PT-DZ870E
*2 The lamp runtime to be displayed is real time. The following conversion is required to calculate the rough estimate for lamp replacement.
Formula for lamp replacement time (rough estimate)
(A x 4 + B x 3) ÷ 4
fA: Runtime when [LAMP POWER] is set to [NORMAL]
fB: Runtime when [LAMP POWER] is set to [ECO]
Note
fThe content of status can be sent via E-mail by pressing the <ENTER> button while displaying the [STATUS] screen.
fSome items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
[NO SIGNAL SHUT-OFF]
A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The
time before switching to standby can be set.
1) Press as to select [NO SIGNAL SHUT-OFF].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0