Panasonic PT-DX100EWJ manual

Panasonic PT-DX100EWJ
6.9 · 1
PDF manual
 · 190 pages
English
manualPanasonic PT-DX100EWJ
Chapter 4Settings — [PROJECTOR SETUP] menu

116 - ENGLISH

[STANDBY MODE]

Set the power consumption during the standby.
1) Press as to select [STANDBY MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ECO] Use this setting to reduce power consumption during standby.
[NORMAL] Use this setting to use the network function during standby.
Note
f In the [ECO] setting, the network function, the <SERIAL OUT> terminal, and some RS-232C commands become inoperable during standby.
In the [NORMAL] setting, the network function and the <SERIAL OUT> terminal become operable during standby.
f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with
when [NORMAL] is set.

[SCHEDULE]

Set the command execution schedule for each day of the week.

Enabling/disabling the schedule function

1) Press as to select [SCHEDULE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the schedule function.
[ON]
Enables the schedule function. Refer to “How to assign a program” (x page 116) or “How to set a
program” (x page 116) for how to set the schedule.
Note
f When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed.
Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].

How to assign a program

1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.

How to set a program

Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the <ENTER> button.
5) Press as to select a command number, and press the <ENTER> button.
f You can change the page using qw.
6) Press asqw to select [TIME], and press the <ENTER> button.

Manual

View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DX100EWJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DX100EWJ.

General
BrandPanasonic
ModelPT-DX100EWJ | PT-DX100EWJ
Productvideo projector
EAN5025232738670
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness10000 ANSI lumens
Projection technologyDLP
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)10000:1
Native aspect ratio4:3
Matrix size0.7 "
Screen size compatibility50 - 600 "
Projection distance- m
Uniformity90 %
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 100 kHz
Keystone correction, vertical-40 - 40 °
Design
Product typeCeiling / Floor mounted projector
Product colorWhite
LED indicatorsYes
Housing materialPlastic
PlacementCeiling, Floor
Power
Power sourceAC
Power consumption (typical)1030 W
Power consumption (standby)3 W
AC input voltage120 - 240 V
AC input frequency50 - 60 Hz
Display
Built-in display-
Video
Full HDNo
3DYes
3D ReadyYes
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Supported 3D formatsFrame packing, Side by side, Top and bottom
Lens system
Focal length range25.6 - 35.7 mm
Aperture range (F-F)1.7 - 1.9
Throw ratio1.8 - 2.5:1
Light source
Lamps quantity2 lamp(s)
Lamp power420 W
Lamp typeUHM
Service life of light source3000 h
Light source typeLamp
Features
Dot clock scanning frequency162 MHz
HDCPYes
Noise level40 dB
Noise level (economic mode)35 dB
Network
Smart TVNo
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN (RJ-45) ports1
Weight & dimensions
Width498 mm
Depth556 mm
Height200 mm
Weight18300 g
Packaging content
Handheld remote controlYes
Remote control typeWireless/Wired
Batteries includedYes
Cables includedAC
Resource CDYes
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 80 %
Storage
Card reader integratedNo
Optical disc player typeNot included
Ports & interfaces
BNC input ports7
S-Video inputs quantity-
Audio (L/R) in0
USB 2.0 ports quantity0
DVI portYes
Component video (YPbPr/YCbCr) in1
Composite video in1
HDMI ports quantity1
VGA (D-Sub) ports quantity1
AC (power) inYes
Serial interface typeRS-232
Other features
RS-232 ports2
Multimedia
Built-in speaker(s)-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DX100EWJ below.

What is the weight of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a weight of 18300 g.

What is the height of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a height of 200 mm.

What is the width of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a width of 498 mm.

What is the depth of the Panasonic PT-DX100EWJ?

The Panasonic PT-DX100EWJ has a depth of 556 mm.

Is the manual of the Panasonic PT-DX100EWJ available in English?

Yes, the manual of the Panasonic PT-DX100EWJ is available in English .

Is your question not listed? Ask your question here

No results