fThe [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[CC1]Displays CC1 data.
[CC2]Displays CC2 data.
[CC3]Displays CC3 data.
[CC4]Displays CC4 data.
Note
fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed
depending on the connected devices or contents being played back.
f[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YC
B
C
R
signal is input.
fIf [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption
function to be connected or contents to be used.
fIf a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [DISPLAY SETTING]
(x page 131) is not displayed.
fClosed captions are not displayed when the menu screen is displayed.
fWhen the correction of [KEYSTONE] is large, all characters may not be displayed. (Only for PT-DW830E, PT-DX100E)
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch [BACK COLOR].
fThe items will switch each time you press the button.
[BLUE]Displays the entire projection area in blue.
[BLACK]Displays the entire projection area in black.
[DEFAULT LOGO]Displays the Panasonic logo.
[USER LOGO]Displays the image registered by the user.
Note
fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[DEFAULT LOGO]Displays the Panasonic logo.
[USER LOGO]Displays the image registered by the user.
[NONE]Disables the startup logo display.
Note
fThe startup logo will disappear in approximately 15 seconds.
fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[UNIFORMITY]
Correct the brightness and color unevenness of the entire screen.
Setting each color
1) Press as to select [UNIFORMITY].
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0