Panasonic KX-TS520 manual

Panasonic KX-TS520
8.1 · 1
PDF manual
 · 2 pages
English
manualPanasonic KX-TS520
5

Things You Should

Know
1-A Controls
5-B Troubleshooting
1
Press the tabs in the direction of the arrows
(), then remove the wall mounting adaptor
().
To temporarily set the
handset down during a
conversation, place it as
shown here.
8.3 cm
Wall Template
PNQX1358VA FM0908NF40517
For your future reference
We recommend keeping a record of the following
information to assist with any repair under warranty.
Serial No.
(found on the bottom of the unit)
Date of purchase
Name and address of dealer
Operating InstructionsIntegrated Telephone SystemModel No.

KX-TS520FX

Please read these operating instructions before
using the unit and save them for future reference.
Accessory information
Handset .................one
Handset cord .............one
Telephone line cord ........one
5-C For your safety
2 Tuck the telephone line cord inside the
wall mounting adaptor, and push it in the
direction of the arrow.
The word “UP WALL should face upward.

1 Getting Started

1-B Connections
M1
FLASH
PROGRAM
PAUSE
A
B
C
DEF
JKL
GHI
1
2
3
4
5
6
7
8
9
0
MNO
TUV
PQRS
W
XYZ
T
ONE
REDIAL
M2
M3
M1
M
2
M
3
VOLUME
M1
M2
M3

1
Lift the handset and dial the phone number
.
2 When you finish talking, place the handset
on the cradle.
To redial the last number dialed
Lift the handset
Press {REDIAL}.
{REDIAL} will dial the last number you called
manually, not a One-Touch Dialer number (3-B).
To adjust the receiver volume (6 levels)
Press
{3} or {4} repeatedly while talking.
After hanging up, the volume level will be saved.
When a call is being received, the unit rings,
the ringer indicator flashes quickly. You can
answer the call by simply lifting the handset.
2-B Answering calls
You can store up to 3 phone numbers in the
one-touch auto dial buttons {M1}, {M2} or {M3}.
Do not press any one-touch auto dial buttons
before storing to prevent misoperation.
1 Lift the handset
Press {PROGRAM}.
2
Press the one-touch auto dial button
{M1},
{M2} or {M3}
.
3 Enter a phone number up to 21 digits.
4 Press {PROGRAM}.
5 When finished, hang up.
If a pause is required for dialing, press
{PAUSE} in step 3. A pause stored in a phone
number counts as one digit (4-C).
3-B Dialing a stored number
1
Lift the handset.
2
Press the one-touch auto dial button
{M1}, {M2} or {M3}
.
{REDIAL} does not work for One-Touch Dialer.
To dial the number again, hang up and repeat steps 1 and 2.
If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased.
Store phone numbers again, if necessary.
If you misprogram
Hang up
Restart from step 1.
To erase a stored number
Lift the handset
Press {PROGRAM}
the one-touch auto dial button
{M1}, {M2}
or {M3}
of the phone number to be erased
{PAUSE}
{PROGRAM}
Hang up.
Memory sticker
Use the memory sticker as a name or phone
number index for the stored numbers.

4 Special Features

2-A Making calls
5-A Wall mounting
3 Drive screws (not included) into the wall
using the wall template below. Connect the
telephone line cord. Mount the unit and then
slide it down.
4-A For call waiting service
users
4-B Temporary tone dialing
(for rotary/pulse service users)
To use call waiting, you must first subscribe to the call waiting service of your service provider/
telephone company. This feature allows you to receive calls while you are already talking on the
phone. If you receive a call while on the phone, you will hear a call waiting tone.
1
Press {FLASH} to answer the 2nd call.
2
To switch between calls, press {FLASH}.
Note:
Please contact your service provider/telephone company for details and availability of this service in your
area.
You can temporarily switch the dialing mode to tone when you need to access touch-tone
services (for example, answering services, telephone banking services, etc.). Press {*} {TONE}
before entering access numbers which require tone dialing.
4-C Pause
(for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service.
Example: If you need to dial the line access number 9 when making outside calls with a PBX:
1 Lift the handset to start calling.
2
{9}
{PAUSE}
3
Dial the phone number.
Note:
A 2.1 second pause is inserted each time {PAUSE} is pressed. Repeat as needed to create longer
pauses.
3-A Storing phone numbers in memory
Problem Cause/solution
The unit does not work.
Check the connections (1-B).
The call cannot be connected
even if you dialed correctly.
Check whether the DIALING MODE selector setting is correct or not
(1-B).
The unit does not ring.
The RINGER selector is set to OFF. Set to HIGH or LOW (1-B).
You cannot store a phone
number in memory.
Confirm the handset is off the cradle.
Do not enter a phone number more than 21 digits long, or the
entered number and the previously stored number will be cleared.
The other party suddenly
cannot hear your voice during
a conversation.
{PROGRAM} was pressed during the conversation. Press
{PROGRAM} again.
You cannot redial by pressing
{REDIAL}.
If the last number dialed was more than 31 digits long, the number
will not be redialed correctly.
Liquid or other form of
moisture has entered the unit.
Disconnect the telephone line cord from the unit. Leave to dry for
at least 3 days. After the unit are completely dry, reconnect the
telephone line cord.
M1
M2
M3
5

Things You Should

Know
The ringer indicator will flash when
j a telephone number is dialed in PULSE mode,
or
j someone picks up or hangs up another phone
connected to the same phone line.
This is normal.
2 Making/Answering Calls 3 One-Touch Dialer

3 One-Touch Dialer

Attach your purchase receipt here.
Memory sticker
7
DIALING MODE
selector
Ringer indicator
8
RINGER selector
3
Auto dial {M1},
{M2}, {M3}
9
{REDIAL}
4
VOLUME {3},
{4}
:
{FLASH}
5
{PAUSE}
;
{PROGRAM}
6
{*} {TONE}
1
Connect the handset cord (
) to the handset
and the unit. Connect the telephone line
cord until it clicks into the unit and telephone
line jack (
). After line connection, lift the
handset to check for a dial tone.
2 Set the DIALING MODE selector to TONE.
If you cannot dial,
set to PULSE.
OFF
HIGH
LOW
DIALING MODE
RINGER
PULSETONE
3 Set the RINGER selector to HIGH, LOW or OFF.
(Example : “HIGH” is selected.)
When set to OFF, the unit
will not ring but the ringer
indicator will still flashing.
OFF
HIGH
LOW
DIALING MODE
RINGER
PULSETONE
Connecting a communication device
If you connect a communication device (computer, modem, fax, answering machine, etc.) to
the telephone line, you can connect it through this unit using the DATA jack. After connecting
the handset and telephone line cord, connect the communication device telephone line cord to
the DATA jack.
Make sure the communication device is not in use before using this unit (making calls, storing phone
numbers in memory etc.) or the communication device may not operate properly.
M
3
M
2
M
1
To single-line
telephone jack
Telephone
line cord
Handset
Handset cord
LINE DATA
To prevent severe injury and lost of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
To prevent the risk of fire or electrical shock, do
not expose the product to rain or any type of
moisture.
Do not disassemble the product.
Do not spill liquids (detergents, cleansers, etc.)
onto the telephone line cord plug, or allow it
to become wet at all. This may cause a fire.
If the telephone line cord plug becomes wet,
immediately pull it from the telephone wall jack,
and do not use.
CAUTION
Never install telephone wiring during an electrical
storm.
Never install telephone line jacks in wet locations
unless the jack is specifically designed for wet
locations.
Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
Use caution when installing or modifying
telephone lines.
Important safety instructions
When using your product, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the
following :
1. Do not use this product near water, for example,
near bathtub, washbowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless
type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in
the vicinity of the leak.
SAVE THESE INSTRUCTIONS
Environment
The product should be kept free from excessive
smoke, dust, high temperature, and vibration.
The product should not be exposed to direct
sunlight.
Do not place heavy objects on top of the product.
The product should be kept away from heat
sources such as radiators, cookers, etc. It should
not be placed in rooms where the temperature
is less than 5°C or greater than 40°C. Damp
basement should also be avoided.
Routine care
Wipe the outer surface of the product with a
soft moist cloth.
Do not use benzine, thinner, or any abrasive
powder.
Notice for product disposal, transfer, or
return
This product can store your private/confidential
information. To protect your privacy/confidentiality,
we recommend that you erase the information
such as one-touch dialer from the memory before
you dispose of, transfer, or return the product.
Screws
8.3 cm
To single-line
telephone jack
(LINE)
Hooks
To communication
device (DATA)
DATA
LINE
Power Source: From telephone line
Dimensions (H x W x D): Approx. 95 mm k 190 mm k 196 mm
Mass (Weight): Approx. 518 g
Operating conditions: 5°C–40°C, 20 %–80 % relative air humidity (dry)
Note:
Design and specifications are subject to change without notice.
The illustrations in these instructions may vary slightly from the actual product.
5-D Specifications
5

Things You Should Know

Note:
This equipment is designed for use on the Czech
Republic and Slovakia analogue telephone
network.
In the event of problems, you should contact your
equipment supplier in the first instance.
For use on other countries, please contact your
equipment supplier.
Declaration of Conformity:
For information of Compliance with EU
relevant Regulatory Directives,
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
http://www.ptc.panasonic.eu/doc
Copyright:
This material is copyrighted by Panasonic
System Networks Malaysia Sdn. Bhd., and
may be reproduced for internal use only.
All other reproduction, in whole or in part,
is prohibited without the written consent of
Panasonic System Networks Malaysia Sdn.
Bhd.
© Panasonic System Networks Malaysia
Sdn. Bhd. 2009
M
1
M
2
M
3
M1
M2
M3
http://www
.panasonic.com
PNQX1358VA_Eng.indd 1 2017/05/08 14:35:12

View the manual for the Panasonic KX-TS520 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TS520 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Panasonic KX-TS520 is a DECT telephone that features a built-in display and comes with a single wired handset. This model does not have a wireless connection, making it suitable for those who prefer a more traditional telephone experience without the need for cordless functionality. Designed to be mounted either on a desk or wall, the KX-TS520 offers flexibility in terms of its placement within your home or office environment. It also includes Caller ID functionality, allowing you to easily see the incoming caller's information before answering the call. In addition, this phone offers a redialing feature, enabling you to quickly call back the most recent number with just a press of a button. The navigation key allows for easy maneuvering through menus and options. The KX-TS520 comes with a single handset, making it suitable for individuals or smaller households. The volume control is digital, allowing for precise adjustment of the sound level to suit your preferences. While the KX-TS520 offers various useful features, it is not specifically designed for elderly users. Its construction emphasizes reliability and durability over time, ensuring its longevity. Overall, the Panasonic KX-TS520 is a DECT telephone with a built-in display. It includes features such as Caller ID, redialing, navigation key, and volume control. It is a wired handset model, making it suitable for desk or wall mounting. This phone is not specifically designed for elderly users but focuses on providing a reliable and durable telephone experience.

General
BrandPanasonic
ModelKX-TS520 | KX-TS520PDB
Productphone
EAN5025232679973
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeDECT telephone
Answering machine-
Handset typeWired handset
Display
Built-in displayYes
Ports & interfaces
Wireless connectionNo
Design
Mounting typeDesk/Wall
Product colorBlack
Elderly phoneNo
Phone features
Speakerphone-
Phonebook capacity- entries
Call management
Caller IDYes
RedialingYes
Management features
Navigation keyYes
Volume controlDigital
Packaging content
Number of handsets included1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TS520 below.

Does the Panasonic KX-TS520 have a built-in display?

Yes, the Panasonic KX-TS520 has a built-in display. This means that the user can easily see important information such as caller ID, call duration, and menu options on the screen.

Is the Panasonic KX-TS520 a wireless phone?

No, the Panasonic KX-TS520 is not a wireless phone. This means that it needs to be connected to a landline phone line for functionality, providing a stable and reliable connection.

Can the Panasonic KX-TS520 be mounted on a desk or wall?

Yes, the Panasonic KX-TS520 can be mounted on both a desk and wall. This offers flexibility in terms of placement and allows the user to customize the phone's location to suit their preferences.

Does the Panasonic KX-TS520 have caller ID?

Yes, the Panasonic KX-TS520 has caller ID. This feature allows the user to easily identify incoming calls, helping them to screen unwanted calls or prioritize important ones.

Is the volume control on the Panasonic KX-TS520 digital?

Yes, the volume control on the Panasonic KX-TS520 is digital. This means that the user can adjust the volume easily and precisely to their preferred level, ensuring crystal-clear sound during calls. Compared to analog volume controls, digital controls often offer more precise adjustments.

How do I troubleshoot if the controls of the Panasonic KX-TS520 phone are not responding?

To troubleshoot if the controls of the Panasonic KX-TS520 phone are not responding, you can follow these steps: 1. Check the connections: Ensure that all the cables, including the handset cord and telephone line cord, are securely connected to their respective ports on the phone and the wall jack. If any connection is loose, reinsert the cables properly. 2. Power cycle the phone: Disconnect the power adapter from the wall outlet and remove the batteries from the phone (if applicable). Wait for about 30 seconds and then reconnect the power adapter and insert the batteries. This will reset the phone and may resolve any temporary issues with the controls. 3. Check the DIALING MODE selector: Make sure that the DIALING MODE selector is set to the appropriate mode (TONE or PULSE) based on your telephone service. If the selector is set incorrectly, the controls may not respond properly. 4. Test with different controls: Try using different controls on the phone, such as the volume buttons or the program button, to see if they are working. If only specific controls are not responding, there may be a problem with those particular buttons. 5. Contact customer support: If the controls still do not respond after following the above steps, it is recommended to contact Panasonic customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for repair if necessary. Remember, these troubleshooting steps are specific to the Panasonic KX-TS520 phone and may not apply to other models.

How do I troubleshoot if the phone is not making or receiving calls?

To troubleshoot if the Panasonic KX-TS520 phone is not making or receiving calls, you can follow these steps: 1. Check the connections: Ensure that the telephone line cord is securely connected to both the phone and the wall jack. If the connection is loose, reinsert the cord properly. 2. Verify the dialing mode: Make sure that the DIALING MODE selector on the phone is set correctly based on your telephone service. If you are unsure, try switching between the TONE and PULSE modes to see if it resolves the issue. 3. Test the phone line: Connect another working phone to the same wall jack and check if it can make or receive calls. If the other phone also has the same issue, the problem may be with the telephone line or the service provider. Contact your service provider for assistance. 4. Check for any call restrictions: Some phone systems or services may have call restrictions or call forwarding settings that could prevent the phone from making or receiving calls. Review any call restriction settings or contact your service provider for guidance. 5. Reset the phone: Disconnect the power adapter from the wall outlet and remove the batteries (if applicable) from the phone. Wait for about 30 seconds, then reconnect the power adapter and insert the batteries. This will reset the phone and may resolve any temporary issues. If the issue persists after following these steps, it is recommended to contact Panasonic customer support for further assistance.

How do I troubleshoot if the receiver volume is too low on the Panasonic KX-TS520 phone?

To troubleshoot if the receiver volume is too low on the Panasonic KX-TS520 phone, you can follow these steps: 1. Lift the handset and ensure that it is properly seated on the cradle. 2. During a conversation, press the {3} or {4} button repeatedly to adjust the receiver volume. Each press will increase or decrease the volume level by one level. There are a total of 6 volume levels available. 3. After adjusting the volume to the desired level, hang up the handset to save the volume setting. 4. If the volume issue persists, check if there is any obstruction or debris in the earpiece or speaker area. Clean the area gently with a soft, dry cloth to remove any dirt or dust that may be affecting the sound quality. 5. If none of the above steps resolve the issue, try resetting the phone by disconnecting the power adapter from the wall outlet and removing the batteries (if applicable). Wait for about 30 seconds, then reconnect the power adapter and insert the batteries. This may help resolve any temporary issues with the receiver volume. If the problem continues, it is recommended to contact Panasonic customer support for further assistance.

How do I troubleshoot if the phone is not storing phone numbers in the one-touch auto dial buttons?

To troubleshoot if the Panasonic KX-TS520 phone is not storing phone numbers in the one-touch auto dial buttons, you can follow these steps: 1. Lift the handset and ensure that it is properly seated on the cradle. 2. Press the {PROGRAM} button on the phone to enter the programming mode. 3. Select the desired one-touch auto dial button (e.g., {1}, {2}, {3}, etc.) where you want to store the phone number. 4. Enter the phone number using the numeric keypad. Make sure to include any necessary prefixes or area codes. 5. Press the {STORE} button to save the phone number to the selected one-touch auto dial button. You may hear a confirmation tone or see a visual indicator to confirm that the number has been stored. 6. Repeat steps 3 to 5 for any additional phone numbers you want to store in the one-touch auto dial buttons. 7. Test the stored phone numbers by pressing the corresponding one-touch auto dial button and verifying if the phone dials the correct number. If the phone still does not store phone numbers in the one-touch auto dial buttons after following these steps, it is recommended to contact Panasonic customer support for further assistance.

How do I troubleshoot if I am having difficulty wall mounting the Panasonic KX-TS520 phone?

To troubleshoot if you are having difficulty wall mounting the Panasonic KX-TS520 phone, you can follow these steps: 1. Ensure that you have the necessary tools and equipment for wall mounting, including a screwdriver, screws, and wall anchors (if required). 2. Locate a suitable wall location for mounting the phone. Ensure that the wall is sturdy and can support the weight of the phone. 3. Use the wall template provided in the packaging to mark the positions for the screw holes on the wall. Align the template with the desired mounting location and mark the hole positions using a pencil or marker. 4. Drill pilot holes at the marked positions on the wall using an appropriate drill bit. Make sure to use the correct size and type of drill bit for the wall material. 5. Attach the wall plate or mounting bracket to the wall using screws and wall anchors (if necessary). Ensure that the plate or bracket is securely fastened to the wall. 6. Align the phone's keyhole slots with the screws on the wall plate or mounting bracket. Slide the phone downward to secure it in place. 7. Test the stability of the mounted phone by gently pulling on it to ensure it is securely attached to the wall. If you continue to experience difficulty or have any concerns about wall mounting the phone, it is recommended to contact Panasonic customer support for further assistance.

Is the manual of the Panasonic KX-TS520 available in English?

Yes, the manual of the Panasonic KX-TS520 is available in English .

Is your question not listed? Ask your question here

No results