Panasonic KX-TGE674 manual

Panasonic KX-TGE674
8 · 1
PDF manual
 · 108 pages
English
manualPanasonic KX-TGE674

Changing the start and end time

1 F

or handset setting: MMENUN#237
For base unit setting (using a
handset): MMENUN#*237

2 Continue from step 3, “Turning silent

mode on/off”, page 53.

Selecting groups to bypass silent

m
ode
1 For handset setting: MMENUN#241
For base unit setting (using a
handset): MMENUN#*241
2 MbN: Select the desired groups. a
MSELECTN
R
” is displayed next to the selected
g
roup numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again.
” disappears.

3 MS

AVEN a MOFFN

Baby monitor

Handset / Base unit
*
1
*1 KX-TGE670 series: page 4
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or even while away from home. The
monitored handset (placed in a baby’s room,
for example) will automatically call the
monitoring handset, base unit, or the phone
number stored when it detects sound.
Important:
R Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R I
f the unit is connected to a PBX system,
you cannot set the baby monitor.
R During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit or charger.
R The monitored handset never rings while it
is being monitored. If the base unit is
placed near the monitored handset, we
recommend turning off the base unit ringer
volume (page 46, 48).

Setting the baby monitor

P
erform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).

To monitor with a unit

T
he internal baby monitor feature is available:
between handsets
between a handset and the base unit
*1
*1 KX-TGE670 series: page 4

1 MMENUN#268

2 MbN: On a MSELECTN
3 MbN: Select the desired unit’s number to
monitor with. a MSAVEN
R Baby monitor will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset or
the base unit can hear the monitored
handset by making an intercom call.

To monitor from outside

I
f you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
This feature is only available for landline.
n From the phonebook:

1 MMENUN#268

2 MbN: On a MSELECTN
54
For assistance, please visit http://shop.panasonic.com/support

Programming

TGE66xUSA(en)_1129_ver034.pdf 54 29/11/2017 3:09:16 PM

Manual

View the manual for the Panasonic KX-TGE674 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TGE674 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 40
S
Sally RepassMay 31, 2019

Does the KX-TGE674 have call blocker that can be used without the need for a subscription to a caller ID phone company?

1 comment
D
daniel burkeFebruary 27, 2020

I have no idea how to put a number code in,for caller block

K
Karen WhiteAugust 28, 2019

Is there anything I need to do to enable the telecoil feature on a handset to pair with my cochlear device or hearing aid? How about the base unit?

T
Tricia RingleyJanuary 31, 2020

When calling our school phone, it says to press 1 to continue the call. Then there is a tone with pauses in between (not a ring) before the voicemail picks up. Why is it doing this? How do we get it to stop doing this and just ring like it should?

J
Josh February 22, 2021

How to setup ring as cell mode I tried to follow the directions but I can't figure it out

M
MarySeptember 30, 2022

New phone KX-TGE674 Panasonic....all four phones connected to electricity, base phone plugged into phone line but all phones show "line busy"

J
Jim GriffinMay 23, 2024

My phones do not ring on most calls. Especially a new number such as a business where I have asked for a call back. How do I correct this?

L
laurenDecember 7, 2020

how do i forward a call from my panasonic hand held phone to my cell

S
SheilaSeptember 14, 2022

My elderly aunt has Panasonic KXTGE674 and she wants to be able to turn the ringer off but still get voicemails.

H
Howard SilverAugust 28, 2020

How do i listen to a message that I previously heard on the handset

J
Julie AtwoodApril 7, 2021

How do I set up a code to retrieve my messages?

Panasonic KX-TGE674 specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TGE674.

The Panasonic KX-TGE674 is a phone that offers a range of features to meet various communication needs. This phone is designed to provide reliable and convenient communication in a home or office setting. One notable feature of the Panasonic KX-TGE674 is its expanded cordless system, which includes a base unit and four additional handsets. This allows for easy access to the phone from multiple locations, increasing convenience and accessibility. The phone also features Panasonic's exclusive Call Block technology, which enables users to block unwanted calls. With this feature, users can prevent calls from telemarketers, robocalls, and other unwanted sources. In addition, the Panasonic KX-TGE674 offers enhanced noise reduction capabilities. This helps to ensure clear and understandable conversations by reducing background noise and enhancing the clarity of the caller's voice. The phone is also equipped with a bright and easy-to-read LCD screen, making it simple to navigate through menus and access various features. The large buttons are designed for comfortable and intuitive use, making dialing and navigating the phone hassle-free. Furthermore, the Panasonic KX-TGE674 has an integrated answering machine, allowing users to conveniently receive and manage voicemail messages. The phone also has a built-in speakerphone for hands-free calling, providing even more convenience during phone conversations. Overall, the Panasonic KX-TGE674 offers a range of useful features for easy and reliable communication. From its expanded cordless system to its call blocking capabilities, this phone is designed to enhance the user's communication experience.

General
BrandPanasonic
ModelKX-TGE674
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TGE674 below.

How do I register additional handsets to my Panasonic KX-TGE674 phone?

To register additional handsets to your Panasonic KX-TGE674 phone, follow these steps: 1. Make sure that the base unit is connected to a power source and the phone line. 2. Place the additional handset on the base unit within 1 minute of starting the registration process. 3. Wait for the speakerphone to turn on automatically and for the registration process to complete. This may take a few moments. 4. Once the registration is successful, you can use the additional handset to make and receive calls. Note: If you have multiple handsets registered to the base unit, ensure that at least one handset is always left on the base unit to supply power. Use the other handsets for making calls. Please keep in mind that these steps are specific to the Panasonic KX-TGE674 phone and may vary for other models. If you encounter any issues during the registration process, refer to the troubleshooting section of the manual or contact Panasonic customer support for further assistance.

How do I pair a Bluetooth device, such as a headset, to my Panasonic KX-TGE674 phone?

To pair a Bluetooth device, such as a headset, to your Panasonic KX-TGE674 phone, follow these steps: 1. On the base unit of your phone, press and hold the "MCELL 1N" or "MCELL 2N" button for about 5 seconds. The corresponding CELL indicator on the base unit will start flashing. 2. While the CELL indicator is flashing, put your Bluetooth device (headset) into pairing mode. Refer to the operating instructions of your Bluetooth device for specific instructions on how to enter pairing mode. 3. Depending on your Bluetooth device, you may be prompted to enter a Bluetooth PIN. The default PIN is usually "0000". Follow the instructions on your Bluetooth device to complete the pairing process. 4. Wait until you hear a long beep sound from the base unit. This may take more than 10 seconds to complete. 5. Once the CELL indicator on the base unit lights up, it means that your Bluetooth device is successfully paired with the phone. You can now use the Bluetooth device (headset) for hands-free conversations when making or receiving calls on your Panasonic KX-TGE674 phone. Note: Only one Bluetooth device can be used with the phone at a time. If you want to pair a different Bluetooth device, make sure to unpair the current device first. Refer to the manual for instructions on unpairing a Bluetooth device. For further assistance, please visit the Panasonic support website.

How do I use the phone system to make and receive calls on my Panasonic KX-TGE674 phone?

To make and receive calls on your Panasonic KX-TGE674 phone, follow these steps: 1. To make a call: - Use the handset to dial the desired phone number. - Press the "Call" or "Talk" button to initiate the call. - Wait for the recipient to answer, and then start your conversation. 2. To answer a call: - When the phone rings, you can answer the call by pressing the "Answer" or "Talk" button on the handset. - If you have a headset connected, you can press the headset's button to answer the call. 3. During a call: - Use the handset's microphone and speaker to talk and listen to the other person. - Adjust the volume using the volume buttons on the handset or the base unit. - To end the call, press the "End" or "Hang Up" button on the handset or the headset. Note: If you have multiple handsets registered to the base unit, ensure that at least one handset is always left on the base unit to supply power. Use the other handsets for making and receiving calls. For further assistance, please refer to the operating instructions of your Panasonic KX-TGE674 phone or visit the Panasonic support website.

How do I save the operating instructions for future reference on my Panasonic KX-TGE674 phone?

To save the operating instructions for future reference on your Panasonic KX-TGE674 phone, follow these steps: 1. Open the operating instructions manual that came with your Panasonic KX-TGE674 phone. 2. Go to the page where the operating instructions are located. This is usually mentioned in the table of contents or at the beginning of the manual. 3. Take a photo or scan the pages of the operating instructions using a smartphone or a scanner. Make sure the pages are clear and legible. 4. Save the digital copy of the operating instructions on your computer, smartphone, or any other device that you can easily access in the future. 5. Alternatively, you can print out the pages of the operating instructions and keep them in a safe place, such as a folder or a drawer, for easy reference. By following these steps, you will have a saved copy of the operating instructions for your Panasonic KX-TGE674 phone, ensuring that you can refer to them whenever needed without relying on the physical manual.

How do I troubleshoot issues with the Bluetooth connection on my Panasonic KX-TGE674 phone?

To troubleshoot issues with the Bluetooth connection on your Panasonic KX-TGE674 phone, follow these steps: 1. Ensure that the Bluetooth feature on your phone is turned on. Check the settings menu on your phone to enable Bluetooth. 2. Make sure that the Bluetooth device you are trying to connect to is within range of the phone. The Bluetooth range is typically around 10 meters (33 feet), but it may vary depending on obstructions and interference. 3. If you are unable to pair your cellular phone to the base unit, confirm that your cellular phone supports the hands-free profile (HFP) specification. Some phones may require you to enter a Bluetooth PIN for pairing, so make sure you enter the correct PIN if prompted. 4. If your cellular phone is already connected to another Bluetooth device, such as a headset, turn it off or disconnect it before attempting to connect to the base unit. 5. If you are still experiencing issues, try turning off and on your cellular phone's Bluetooth feature. This can help reset the Bluetooth technology on your phone. If the problem persists, consider referring to the troubleshooting section of the manual or contacting Panasonic customer support for further assistance.

Is the manual of the Panasonic KX-TGE674 available in English?

Yes, the manual of the Panasonic KX-TGE674 is available in English .

Is your question not listed? Ask your question here

No results