Panasonic KX-TGE210FX manual

Panasonic KX-TGE210FX
7.1 · 2
PDF manual
 · 48 pages
English
manualPanasonic KX-TGE210FX

Changing the unit’s region

setting/Resetting the base unit

1 M N#136

2 MbN:

Select the desired country. a MOKN
Other = countries except Czech and
Slovakia
Česká rep. = Czech
Slovensko = Slovakia
3 MbN: Yes a MOKN a M
N
N
ote:
R Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.

Registering a unit

Operating additional units

Additional handsets

U
p to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.

Registering a handset to the

base unit

The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
n
ear the base unit), re-register the handset.

1 Handset:

M
N#130

2 B

ase unit:
Press and hold M
N
for about 5 seconds.
R I
f all registered handsets start ringing,
press M
N again to stop, then repeat
this step.

3 Handset:

MOKN a Wait until Base PIN is
displayed. a Enter the base unit PIN
(default: 0000). a MOKN
R If you forget your PIN, contact an
authorised service centre.

Deregistering a handset

A
handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.

1 M

N#131
R A
ll handsets registered to the base unit
are displayed.

2 MbN: Select the handset you want to

cancel. a MOKN
3 MbN: Yes a MOKN a M
N

Increasing the range of the base

u
nit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.

Setting the repeater mode

1 M

N#138

2 MbN:

Select the desired setting. a MOKN
a M
N
33

Programming

TGE2xxFX(en)_0224_ver101.pdf 33 2015/02/24 12:05:15

Manual

View the manual for the Panasonic KX-TGE210FX here, for free. This manual comes under the category phones and has been rated by 2 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TGE210FX or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
SamehSeptember 30, 2022

Handset did not respond to any sitting

Panasonic KX-TGE210FX specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TGE210FX.

General
BrandPanasonic
ModelKX-TGE210FX
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TGE210FX below.

How do I charge the Panasonic KX-TGE210FX phone?

To charge the Panasonic KX-TGE210FX phone, follow these steps: 1. Connect the AC adaptor: Plug one end of the AC adaptor into the base unit's DC IN 6V jack and the other end into a power outlet. 2. Place the handset on the base unit: Align the charging contacts on the handset with the charging terminals on the base unit. Make sure the handset is placed correctly on the base unit. 3. Charging indicator: The charging indicator on the base unit will light up to indicate that the handset is charging. Leave the handset on the base unit until it is fully charged. 4. Check the battery level: To check the battery level of the handset, press the MENU button on the handset, navigate to "Settings" using the navigation keys, select "Handset" and then "Battery Level". The battery level will be displayed on the screen. 5. Charging time: It may take several hours to fully charge the handset, depending on the remaining battery level. Note: It is recommended to charge the handset before using it for the first time and to place the handset on the base unit when not in use to keep the battery charged. Please refer to the manual for more detailed instructions and illustrations.

How do I set the date and time on the Panasonic KX-TGE210FX phone?

To set the date and time on the Panasonic KX-TGE210FX phone, follow these steps: 1. Press the MENU button on the handset. 2. Use the navigation keys to scroll and select "Settings". 3. Press the OK button to confirm. 4. Scroll and select "Handset". 5. Press the OK button to confirm. 6. Scroll and select "Date & Time". 7. Press the OK button to confirm. 8. Enter the current date using the number keys. For example, enter "MM/DD/YYYY". 9. Press the OK button to confirm. 10. Enter the current time using the number keys. For example, enter "HH:MM AM/PM". 11. Press the OK button to confirm. 12. Press the OFF button to exit the menu. Note: It is important to set the date and time correctly for accurate call logs and other time-related features. Please note that the steps provided are based on the Panasonic KX-TGE210FX phone. If you encounter any difficulties or if the menu options differ slightly, please consult the manual for further assistance.

How do I register a handset to the base unit of the Panasonic KX-TGE210FX phone?

To register a handset to the base unit of the Panasonic KX-TGE210FX phone, follow these steps: 1. Press and hold the MUTE button on the base unit for about 5 seconds. The registration mode will be activated. 2. On the handset, navigate to the menu by pressing the MENU button. 3. Use the navigation keys to scroll and select "Settings". 4. Press the OK button to confirm. 5. Scroll and select "Handset". 6. Press the OK button to confirm. 7. Scroll and select "Register". 8. Press the OK button to confirm. 9. The handset will search for the base unit and display the base unit's ID. 10. Enter the PIN code for the base unit, if prompted. The default PIN code is usually "0000". 11. Press the OK button to confirm. 12. The handset will be registered to the base unit and the registration process will be completed. Note: If you encounter any issues during the registration process, such as the maximum number of handsets already registered or entering the wrong PIN code, please refer to the troubleshooting section of the manual for further assistance. Please note that the steps provided are based on the Panasonic KX-TGE210FX phone. If you have a different model or if the menu options differ slightly, please consult the manual for specific instructions.

How do I change the region setting on the Panasonic KX-TGE210FX phone?

To change the region setting on the Panasonic KX-TGE210FX phone, follow these steps: 1. Press the MENU button on the handset. 2. Use the navigation keys to scroll and select "Settings". 3. Press the OK button to confirm. 4. Scroll and select "Handset". 5. Press the OK button to confirm. 6. Scroll and select "Region Setting". 7. Press the OK button to confirm. 8. Select the desired country from the list. For example, select "Other" for countries other than Czech and Slovakia, "Česká rep." for Czech, or "Slovensko" for Slovakia. 9. Press the OK button to confirm. 10. The region setting will be changed to the selected country. Note: Changing the region setting may cause the settings for your country or customized settings to return to their default settings. Please ensure that you select the correct region setting for your location. Please note that the steps provided are based on the Panasonic KX-TGE210FX phone. If you have a different model or if the menu options differ slightly, please consult the manual for specific instructions.

How do I change the display language on the Panasonic KX-TGE210FX phone?

To change the display language on the Panasonic KX-TGE210FX phone, follow these steps: 1. Press the MENU button on the handset. 2. Use the navigation keys to scroll and select "Settings". 3. Press the OK button to confirm. 4. Scroll and select "Handset". 5. Press the OK button to confirm. 6. Scroll and select "Language". 7. Press the OK button to confirm. 8. Select the desired language from the list. For example, select "English" for English language display. 9. Press the OK button to confirm. 10. The display language will be changed to the selected language. Note: Changing the display language may require the phone to restart. Please wait for the phone to restart and the new language to take effect. Please note that the steps provided are based on the Panasonic KX-TGE210FX phone. If you have a different model or if the menu options differ slightly, please consult the manual for specific instructions.

How many handsets can be registered to the base unit of the Panasonic KX-TGE210FX phone?

The Panasonic KX-TGE210FX phone can register up to 6 handsets to the base unit. If you are unable to register a handset to the base unit, it may be because the maximum number of handsets has already been registered. In this case, you will need to cancel the registration of any unused handsets from the base unit. Please refer to page 33 of the manual for instructions on how to cancel handset registrations. If you are experiencing difficulties registering a handset and the maximum number of handsets has not been reached, it is possible that you entered the wrong PIN code. If you forget your PIN code, it is recommended to contact an authorized service center for assistance. Please note that the information provided is specific to the Panasonic KX-TGE210FX phone. If you have a different model or if the menu options differ slightly, please consult the manual for model-specific instructions.

Is the Panasonic KX-TGE210FX phone compatible with all telephone networks?

The Panasonic KX-TGE210FX phone is compatible with most telephone networks. However, it is important to note that compatibility may vary depending on your specific network provider and the technology they use. The phone supports standard analog telephone lines and is designed to work with most landline telephone networks. To ensure compatibility with your specific telephone network, it is recommended to check with your network provider or consult the product specifications provided by Panasonic. They can provide you with information regarding the compatibility of the Panasonic KX-TGE210FX phone with their network. Please note that the information provided is based on the general compatibility of the Panasonic KX-TGE210FX phone. For more detailed and specific information, it is always best to consult the product manual or contact the manufacturer directly.

Where can I find support contact information for the Panasonic KX-TGE210FX phone?

To find support contact information for the Panasonic KX-TGE210FX phone, follow these steps: 1. Open the manual of the Panasonic KX-TGE210FX phone. 2. Navigate to the "Introduction" section. 3. Look for the "General information" subsection. 4. In the "General information" subsection, you will find the support contact information. 5. The support contact information may include the name and address of the dealer or service center. Please note that the specific support contact information may vary depending on your location and the version of the manual. It is recommended to refer to the "General information" section of the manual for the most accurate and up-to-date support contact information. If you are unable to find the support contact information in the manual, you can also try visiting the official Panasonic website or contacting their customer support directly for assistance.

Is the manual of the Panasonic KX-TGE210FX available in English?

Yes, the manual of the Panasonic KX-TGE210FX is available in English .

Is your question not listed? Ask your question here

No results