Panasonic KX-TG9541B manual

Panasonic KX-TG9541B
5.4 · 1
PDF manual
 · 88 pages
English
manualPanasonic KX-TG9541B

FCC and other information

This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains,
among other information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided to the
telephone company.
L Registration No.............(found on the bottom of the
unit)
L Ringer Equivalence No. (REN).......0.1B (line1 and
line2)
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with the product. It is
designed to be connected to a compatible modular jack
that is also compliant.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total
RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for the
product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 03 is a
REN of 0.3).
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service may
be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide advance
notice in order for you to make necessary modifications
to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair
or warranty information, please contact a Factory
Service Center or other Authorized Servicer. If the
equipment is causing harm to the telephone network,
the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation commission
for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this equipment does not disable your alarm
equipment. If you have questions about what will
disable alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as defined
by the FCC in 47 CFR Section 68.316.
When you hold the phone to your ear, noise might be
heard in your Hearing Aid. Some Hearing Aids are not
adequately shielded from external RF (radio
frequency) energy. If noise occurs, use an optional
headset accessory or the speakerphone option (if
applicable) when using this phone. Consult with your
audiologist or Hearing Aid manufacturer about the
availability of Hearing Aids which provide adequate
shielding to RF energy commonly emitted by digital
devices.
WHEN PROGRAMMING EMERGENCY NUMBERS
AND(OR) MAKING TEST CALLS TO EMERGENCY
NUMBERS:
1) Remain on the line and briefly explain to the
dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such
as early morning or late evenings.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Privacy of communications may not be ensured when
using this phone.

CAUTION:

Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate this device.

NOTE:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio

For assistance, please visit http://www.panasonic.com/help

71

Useful Information

TG954x(en)_0528_ver011.pdf 71 2013/05/28 11:09:55

Manual

View the manual for the Panasonic KX-TG9541B here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TG9541B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 8
B
Bruce NorthcottNovember 28, 2022

Hi what part number is the additional handsets for the PANASONIC KX-TG9541B I note it takes up to six

T
tammy siemJune 28, 2023

My panasonic is stuck on mute, I see a bell with a line through it. How do I get it off mute?

P
Petko ArnaoudovJune 1, 2021

I have Panasonic KX-TG9541B. In the handset message appears: "Base no power". I use the base, but cannot use the handset.

C
calAugust 17, 2021

how to erase entire memory without having to do all 250 individually?

M
Molly ResslerOctober 21, 2021

How to record a new voicemail greeting

G
Gretlyn Zenns ThomasDecember 2, 2020

How to make a conference call

C
cynthia allenAugust 27, 2023

what does check line 2 mean?

J
John EltonApril 9, 2024

Base unit will not ring incoming calls

Panasonic KX-TG9541B specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TG9541B.

The Panasonic KX-TG9541B is a DECT telephone equipped with an answering machine. The wireless handset allows for convenient mobility during phone calls. With the feature of any key answer, users can easily pick up incoming calls. The phone also includes a belt clip for portability and an alarm clock for added functionality. In terms of call management, this phone offers call hold and microphone mute functions, providing users with control over their conversations. The built-in display, with a resolution of 103 x 65 pixels, allows for clear visibility of caller information. The display is also equipped with a backlight for easy reading in various lighting conditions. The diagonal size of the display is 3.4 inches, providing a spacious viewing area. To enhance user experience, the Panasonic KX-TG9541B features speed dialing, allowing for quick and convenient calling. The mounting type for this phone can be either on a desk or wall, providing flexibility in placement. With these specifications, the Panasonic KX-TG9541B offers a comprehensive set of features for residential or professional use. Its wireless handset and answering machine make it a convenient tool for communication. The inclusion of an alarm clock adds versatility to this phone. Additionally, features such as call hold, microphone mute, and speed dialing contribute to the phone's functionality. The built-in display with a backlight ensures clear visibility of caller information. Overall, the Panasonic KX-TG9541B is a reliable and practical DECT telephone option.

General
BrandPanasonic
ModelKX-TG9541B | KX-TG9541B
Productphone
EAN0885170116207, 8851701162076
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeDECT telephone
Answering machineYes
Handset typeWireless handset
ECO modeYes
IntercomYes
Number of ringer volume levels7
Silent modeYes
Recording time60 min
Management features
Any key answerYes
Alarm clockYes
Languages supportENG, ESP
Integrated voicemailYes
Packaging content
Belt clipYes
Number of handsets included1
Base stationYes
Call management
Call holdYes
Speed dialingYes
Caller IDYes
Call waitingYes
Caller ID on call waitingYes
Call screeningYes
Conference callYes
Redial list capacity5
RedialingYes
Phone features
Microphone muteYes
Phonebook capacity3000 entries
VIP group functionYes
Multi handset capability6
Noise reductionYes
SpeakerphoneYes
Display
Built-in displayYes
Display resolution103 x 65 pixels
Backlight displayYes
Backlight colorWhite
Display diagonal3.4 "
Design
Mounting typeDesk/Wall
Product colorBlack
Elderly phone-
Keypad illuminationYes
Weight & dimensions
Base weight600 g
Handset weight134 g
Base dimensions224 x 125 x 129 mm
Handset dimensions (WxDxH)48 x 31 x 168 mm
Power
Standby time168 h
Talk time15 h
Battery technologyNickel-Metal Hydride (NiMH)
AC input frequency1.9 Hz
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TG9541B below.

What is the screen size of the Panasonic KX-TG9541B?

The screen size of the Panasonic KX-TG9541B is 3.4 ".

What is the screen resolution of the display of the Panasonic KX-TG9541B?

The screen resolution of the Panasonic KX-TG9541B is 103 x 65 pixels.

Does the Panasonic KX-TG9541B have an answering machine?

Yes, the Panasonic KX-TG9541B comes with an answering machine, making it convenient for users to retrieve missed calls and messages.

Is the handset of the Panasonic KX-TG9541B wireless?

Yes, the handset of the Panasonic KX-TG9541B is wireless, allowing for more flexibility and mobility while using the phone.

Does the Panasonic KX-TG9541B have a built-in display with a resolution of 103 x 65 pixels?

Yes, the Panasonic KX-TG9541B features a built-in display with a resolution of 103 x 65 pixels, providing clear and sharp visuals for users.

Can the Panasonic KX-TG9541B be mounted on both a desk and a wall?

Yes, the Panasonic KX-TG9541B can be mounted on both a desk and a wall, giving users the option to choose their preferred setup.

Does the Panasonic KX-TG9541B come with caller ID?

Yes, the Panasonic KX-TG9541B includes caller ID, allowing users to see who is calling before answering, which is a convenient feature for screening calls.

How do I set up the Panasonic KX-TG9541B phone for use?

To set up the Panasonic KX-TG9541B phone, follow these steps: 1. Before you start, make sure you have read the "Getting Started" section in the operating instructions. 2. Connect the base unit to a power outlet using the supplied AC adaptor. 3. Insert the rechargeable batteries into the handset(s) and charge them for at least 7 hours. 4. Connect the base unit to your telephone line using the supplied telephone line cord. 5. If you want to mount the base unit on a wall, use the supplied desk stand/wall mounting adaptor. 6. Place the handset(s) on the base unit to register them. The registration process may take a few moments. 7. Set the date and time on the phone by following the instructions in the operating instructions. 8. Customize the phone settings according to your preferences, such as ringtone, volume, and display language. 9. If you have a cellular phone, you can link it to the Panasonic KX-TG9541B phone using the Link-to-Cell feature. Refer to the operating instructions for detailed instructions on how to set up this feature. 10. Once you have completed these steps, your Panasonic KX-TG9541B phone is ready for use. Remember to consult the operating instructions for more detailed information and troubleshooting tips.

How do I connect my cell phone to the Panasonic KX-TG9541B phone using the Link-to-Cell feature?

To connect your cell phone to the Panasonic KX-TG9541B phone using the Link-to-Cell feature, follow these steps: 1. Make sure your cell phone has Bluetooth wireless technology that is compatible with the Panasonic KX-TG9541B. 2. Place your cell phone within a range of 0.6 meters to 3 meters (2 feet to 10 feet) from the base unit for optimal performance. 3. On the Panasonic KX-TG9541B base unit, press the "CELL" button followed by the corresponding number for the desired cell phone line (e.g., "CELL 1: MENU #6241"). 4. The CELL indicator on the base unit will start flashing. Complete the next steps within 5 minutes. 5. On your cell phone, follow the instructions to enter the pairing mode. It may ask for the base unit PIN, which is usually "0000". 6. Wait for a long beep sound, indicating that the pairing is complete. The CELL indicator on the base unit will light up, indicating a successful connection. 7. Ensure that your cell phone is set to automatically connect to the Panasonic KX-TG9541B. 8. To unpair a cell phone, press the "CELL" button on the base unit followed by the corresponding number for the cell phone line (e.g., "CELL 1: MENU #6111"). Select "Yes" to confirm the unpairing. By following these steps, you can easily connect your cell phone to the Panasonic KX-TG9541B phone using the Link-to-Cell feature.

What should I do if I experience interference or poor call quality when using the Panasonic KX-TG9541B phone?

If you experience interference or poor call quality when using the Panasonic KX-TG9541B phone, there are several steps you can take to improve the situation: 1. Check the range: The Bluetooth headset can communicate with the base unit within a range of approximately 10 meters (33 feet). If you are experiencing interference, try moving closer to the base unit to improve the connection. 2. Disconnect other Bluetooth devices: If your headset is already connected to another Bluetooth device, such as your cellular phone, disconnect it from that device before connecting it to the base unit. Only one active Bluetooth connection can be made at a time. 3. Pair the headset: If the headset has not been paired to the base unit, follow the pairing procedure outlined in the manual (page 51) to establish a connection. 4. Check for compatibility: Depending on the cellular phone's compatibility, you may not be able to make or answer cellular calls even if the phone is connected to the base unit. Ensure that the CELL indicator is lit up and the cellular phone is properly connected to the base unit. 5. Restart the cellular phone: If you can make and answer cellular calls but cannot hear any sound, try turning off and on your cellular phone. This can help reset the Bluetooth technology. 6. Check the dialing mode: If you cannot make a call using the landline, verify that the dialing mode is set correctly. Refer to the manual (page 16) for instructions on changing the dialing mode. 7. Ensure Caller ID service is active: If caller information is not displayed, make sure you have subscribed to Caller ID service. Additionally, check if any additional telephone equipment, such as a Caller ID box or cordless telephone line jack, is interfering with the unit. Disconnecting other equipment may resolve the issue. 8. Move closer to the base unit: If caller information is displayed or announced late, try moving closer to the base unit to improve reception. For further assistance, you can visit the Panasonic support website at http://www.panasonic.com/help.

Is the manual of the Panasonic KX-TG9541B available in English?

Yes, the manual of the Panasonic KX-TG9541B is available in English .

Is your question not listed? Ask your question here

No results