Multi-unit Operation 42
Helpli ne T el. No.: U. K. 0844 844 38 98 R.O.I . 01289 8333
Import ant :
L Before registering the repeater t o this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1 " (centre of joystick ) i | i
#
2 {^}/ {V}: “Other Options ” i
#
3 {^}/ {V}: “Repeater Mode ” i
#
4 {^}/ {V}: “On ” or “Off ” i #
i {ih}
Note:
L After turning repeater mode on or off,
w will flash on the handset
momentarily . This is normal. The
handset can be used once w stops
flashing.
Intercom between handsets Intercom calls can be made between
handsets in the same radio cell.
Example: When handset 1 c alls
handset 2
1 Handset 1: {INT } i Press {2 } (desired
handset number).
2 Handset 2: {C}
3 When finished talking, press {ih}.
Transferring calls between handsets, conference calls Outside calls can be transferred
between 2 people in the same radio cell.
2 people in the sam e radio cell can have
a conference call with an outside p arty .
Example: When handset 1 transfers a
call to handset 2
1 Handset 1: During an outside c all, press {INT }.
i Press {2 } (desired handset
number).
L The outside call will be put on
hold.
L If there is no answer , press {INT }
to return to the outside call.
2 Handset 2: {C}
L Handset 2 can talk with handset
1.
3 Handset 1: T o complete the c all transfer , press
{ih}.
T o establish a conference call, press
{3 }.
T ransferrin g a call wit hout speaking
to the other handset user
1 During an outside call, press {INT }.
i P ress the desired handset
number .
L k flashes t o indicate the outside
call is on hold.
2 {ih} L The outside call rings at the other
handset.
TG8200_20E.book Page 42 Monday, June 18, 2007 9:03 AM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0