Panasonic KX-TG6461E manual

Panasonic KX-TG6461E
8 · 1
PDF manual
 · 48 pages
English
manualPanasonic KX-TG6461E

Programming

24
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Special programming

Alarm

You can set one of 2 different alarm options (once
or daily) at a time for each handset. An alarm
sounds at the set time for 3 minutes.
Important:
L Set the date and time beforehand (page 13).

1 8 (middle soft key)

2 {V}/{^}: Handset Setup i M
3 {V}/{^}: Time Settings i M
4 {V}/{^}: Alarm i M
5 {V}/{^}: Select the desired alarm option. i
M
6 Enter the desired date and month. i M
7 Set the desired time. i M
8 {V}/{^}: Select the desired alarm tone. i
M
L We recommend selecting a different ringer
tone to the one used for outside calls.

9 M i {ih}

L When the alarm is set, E is displayed.
Note:
L You can skip to step 4 by pressing {R/E} in
standby mode.
L To stop the alarm, press any dial key or place
the handset on the charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L If you select Once, the setting changes to
Off after the alarm sounds.

Changing the base unit PIN (Personal

Identification Number)

Important:
L If you change the PIN, please make note of your
new PIN. The unit will not reveal the PIN to you.
If you forget your PIN, see page 42.

1 8 (middle soft key)

2 {V}/{^}: Base Unit Setup i M
3 {V}/{^}: Base Unit PIN i M

4 Enter the current 4-digit base unit PIN (default:

0000).
5 Enter the new 4-digit base unit PIN. i M
i {ih}

Incoming call barring (Caller ID

subscribers only)

This feature allows the unit to reject calls from
specified phone numbers that you do not want to
answer such as junk calls.
When a call is received, the unit does not ring while
the caller is being identified. If the phone number
matches an entry in the call barred list, the unit
sends out a busy tone to the caller, and then
disconnects the call.
Program this setting using either the base unit or
one of the handsets.
Important:
L When the unit receives a call from a number that
is stored in the call barred list, the call is logged
in the caller list (page 27) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
barred list by using the caller list or by entering the
numbers directly.
Important:
L It is advised to store the phone number with an
area code in the call barred list.
Y Handset
Off
Turns alarm off. Go to step 9.
Once
An alarm sounds once at the set time.
Daily
An alarm sounds daily at the set time. Go to
step 7.
Y Handset
TG6461E(e).book Page 24 Monday, March 16, 2009 8:50 AM

Manual

View the manual for the Panasonic KX-TG6461E here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TG6461E or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
G
GeraldineOctober 23, 2022

How can you make ringing tone longer

Panasonic KX-TG6461E specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TG6461E.

General
BrandPanasonic
ModelKX-TG6461E
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TG6461E below.

How can I switch between uppercase and lowercase characters when entering text on the Panasonic KX-TG6461E phone?

To switch between uppercase and lowercase characters when entering text on the Panasonic KX-TG6461E phone, follow these steps: - Press the * key to switch between uppercase and lowercase characters. - Use the dial keys to enter characters and numbers. - Press the ^ key to erase the highlighted character or number. Hold the ^ key to erase all characters. - To enter another character on the same dial key, move the cursor to the next space by pressing {8} on the base unit or {V} on the handset. - Remember, if you don't press any dial key within 5 seconds after entering a character, the character is fixed, and the cursor moves to the right. These steps will help you easily switch between uppercase and lowercase characters while entering text on your Panasonic KX-TG6461E phone.

What should I do if the character I entered is fixed and the cursor moves to the right without pressing any dial key within 5 seconds on the Panasonic KX-TG6461E phone?

To fix a character and prevent the cursor from moving to the right without pressing any dial key within 5 seconds on the Panasonic KX-TG6461E phone, follow these steps: 1. Enter characters and numbers using the dial keys. 2. Use {^} to erase the highlighted character or number, and press and hold {^} to erase all characters. 3. Press {*} to switch between uppercase and lowercase. 4. To enter another character on the same dial key, press {8} on the base unit or {V} on the handset to move the cursor to the next space. 5. Remember that if you do not press any dial key within 5 seconds after entering a character, the character will be fixed, and the cursor will move to the right.

Is the manual of the Panasonic KX-TG6461E available in English?

Yes, the manual of the Panasonic KX-TG6461E is available in English .

Is your question not listed? Ask your question here

No results