Panasonic KX-TG6461E manual

Panasonic KX-TG6461E
8 · 1
PDF manual
 · 48 pages
English
manualPanasonic KX-TG6461E

Making/Answering Calls

14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Making calls

Using the base unit =

1
Dial the phone number.
L To correct a digit, press ^.

2 Lift the corded handset.

3 When you finish talking, place the corded

handset on the cradle.
Note:
L You can also dial the phone number after lifting
the corded handset.
Using the speakerphone

1 During a conversation with the corded

handset, press {s} to turn on the
speakerphone.
L You can place the corded handset on the
cradle.
L Speak into the base unit microphone.
L Speak alternately with the other party.
2 When you finish talking, press {s}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch to the receiver, lift the corded handset.

Using the handset Y

1
Lift the handset and dial the phone number.
L To correct a digit, press ^.

2 {C}

3 When you finish talking, press {ih} or place
the handset on the charger.
Using the speakerphone
1 During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the other party.
2 When you finish talking, press {ih}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch back to the receiver, press {C}.

Adjusting the receiver or speaker

volume

Press {^} or {V} repeatedly while talking.

Making a call using the redial list

The last 10 phone numbers dialled are stored in
the redial list in each unit (each 24 digits max.).

1 Proceed with the operation for your unit.

Base unit: {R}
Handset: j (right soft key)
2 {V}/{^}: Select the desired phone number.

3 Proceed with the operation for your unit.

Base unit: Lift the corded handset.
Handset: {C}
Erasing a number in the redial list

1 Proceed with the operation for your unit.

Base unit: {R}
Handset: j (right soft key)
2 {V}/{^}: Select the desired phone number.
i 8 i M
3 {V}/{^}: Yes i M

4 Proceed with the operation for your unit.

Base unit: {b}
Handset: {ih}

Pause (for PBX/long distance service

users)

A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 18).
Example: If you need to dial the line access
number “0” when making outside calls with a PBX:

1 {0}

2 Proceed with the operation for your unit.

Base unit: {R}
Handset: l

3 Dial the phone number.

= Base unit / Y Handset
= Base unit / Y Handset
= Base unit / Y Handset
TG6461E(e).book Page 14 Monday, March 16, 2009 8:50 AM

Manual

View the manual for the Panasonic KX-TG6461E here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TG6461E or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
G
GeraldineOctober 23, 2022

How can you make ringing tone longer

Panasonic KX-TG6461E specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TG6461E.

General
BrandPanasonic
ModelKX-TG6461E
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TG6461E below.

How can I switch between uppercase and lowercase characters when entering text on the Panasonic KX-TG6461E phone?

To switch between uppercase and lowercase characters when entering text on the Panasonic KX-TG6461E phone, follow these steps: - Press the * key to switch between uppercase and lowercase characters. - Use the dial keys to enter characters and numbers. - Press the ^ key to erase the highlighted character or number. Hold the ^ key to erase all characters. - To enter another character on the same dial key, move the cursor to the next space by pressing {8} on the base unit or {V} on the handset. - Remember, if you don't press any dial key within 5 seconds after entering a character, the character is fixed, and the cursor moves to the right. These steps will help you easily switch between uppercase and lowercase characters while entering text on your Panasonic KX-TG6461E phone.

What should I do if the character I entered is fixed and the cursor moves to the right without pressing any dial key within 5 seconds on the Panasonic KX-TG6461E phone?

To fix a character and prevent the cursor from moving to the right without pressing any dial key within 5 seconds on the Panasonic KX-TG6461E phone, follow these steps: 1. Enter characters and numbers using the dial keys. 2. Use {^} to erase the highlighted character or number, and press and hold {^} to erase all characters. 3. Press {*} to switch between uppercase and lowercase. 4. To enter another character on the same dial key, press {8} on the base unit or {V} on the handset to move the cursor to the next space. 5. Remember that if you do not press any dial key within 5 seconds after entering a character, the character will be fixed, and the cursor will move to the right.

Is the manual of the Panasonic KX-TG6461E available in English?

Yes, the manual of the Panasonic KX-TG6461E is available in English .

Is your question not listed? Ask your question here

No results