Voice Mail Service 36 For assistance, please visit http://www.panasonic.com/help
Using Voice Mail service V oice Mail is an automatic answering
service offered by your telephone
service provider . After you subscribe to
this service, the telephone service
provider ’s V oice Mail system will
answer calls for you when you are
unavailable to answer the phone or
when your line is busy . Messages are
recorded by the telephone service
provider , not your telephone.
Important:
LT o use the V oice Mail service
provided by your telephone service
provider rather than the unit’s
answering system, turn off the
answering system (page 30).
Storing the Voice Mail (VM) access number In order to listen to your V oice Mail
messages, you must dial your
telephone service provider ’s V oice Mail
access number . Once you have stored
your V oice Mail access number , you
can dial it automatically (page 37).
1 {MENU } i {0 }{ 7 }{ 1 }
2 Enter your access number (max. 32 digits). i {Save } i {OFF }
Note:
LWhen storing your V oice Mail access
number and your mailbox password,
press {PA U S E } to add pauses (page
15) between the access number and
the password as necessary . Consult
your telephone service provider for
the required pause time.
Example:
T o erase the V oice Mail access
number
Repeat step 1, then press and hold
{Clear } until all digits are erased. Press
{Save }, then press {OFF }.
Voice Mail (VM) tone detection Y our telephone service provider sends
special signals (sometimes called
“V oice Mail tones” or “stutter tones”) to
the unit to let you know you have new
V oice Mail messages. If you hear a
series of dial tones followed by a
continuous dial tone after you press
{C}, you have new V oice Mail
messages. Minutes after you hang up a
call or after the phone stops ringing,
your unit will check the phone line to
see if new V oice Mail messages have
been recorded.
T urn this feature off when:
– Y ou do not subscribe to V oice Mail
service.
– Y our telephone service provider does
not send V oice Mail tones.
– Y our phone is connected to a PBX.
If you are not sure which setting is
required, consult your telephone
service provider .
T urning VM ton e detection on/off
The default setting is “On ”.
1 {MENU } i {0 }{ 7 }{ 2 }
2 {V}/ {^}: Select the desired setting.
3 {Save } i {OFF }
1-222-333-4444 VM access number Pauses Password PPPP 8888 TG602X_605X.book Page 36 Tuesday, December 5, 2006 9:33 AM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0