Preparation 14 For assistance, please visit http://www.panasonic.com/help
Setting the unit before use
Important:
LT o program features by scrolling
through the display menus, see page
24.
Display language Y ou can select either “English ” or
“Español ” as the display language.
The default setting is “English”.
1 KX-TG6021/KX-TG6022 {MENU } i {0 }{ 8 }
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6054
{MENU } i {0 }{ 8 }{ 1 }
2 {V}/ {^}: Select the desired setting.
3 Press the right soft key to save. i
{OFF }
Voice guidance language Y ou can select either “English ” or
“Español ” as the voice guidance
language of the answering system. The
default setting is “English”.
1 {MENU } i {0 }{ 8 }{ 2 }
2 {V}/ {^}: Select the desired setting.
3 {Save } i {OFF }
Dialing mode If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone ”: For tone dial service.
“Pulse ”: For rotary/pulse dial service.
1 {MENU } i {0 }{ 5 }{ 1 }
2 {V}/ {^}: Select the desired setting.
3 {Save } i {OFF }
Date and time Set the correct date and time.
– T o use the available alarm function
(page 28).
– When you play back a message from
the answering system (page 31), the
unit announces the day an d time it
was recorded. (KX-TG6051/KX-
TG6052/KX-TG6053/KX-TG6054)
1 {MENU } i {4 }{ 1 }
2 Enter the current month, day, and year by selecting 2 digits for each.
Example: August 15, 2007
{0 }{ 8 } {1 }{ 5 } {0 }{ 7 }
3 Enter the current hour and minute (12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0 }{ 9 } {3 }{ 0 }
4 {AM/PM }: Select “AM ” or “ PM ”.
5 {Save } i {OFF }
Note:
LIf you make a mistake when entering
the date and time, press {< }, {> },
{^}, or {V} to move the cursor , then
make the correction.
LThe date and time may be incorr ect
after a power failure. In this case, set
the date and time again.
Available model:
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6054
TG602X_605X.book Page 14 Tuesday, December 5, 2006 9:33 AM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0