Programmable Settings 84 For assistance, please visit http://www.panasonic.co m/phonehelp
Cordless handset line selection
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {V} or {^}, then press .
3 Scroll to “Line selection ” by
pressing {V} or {^}, then press .
4 Press {V} or {^} to select the desired
line.
5 Press . L Confirmation tone is heard.
Setting up the telephone line
Restricting calls Y ou can prevent selected phone numbers
from being dialed by the base unit and
cordless handset(s). Phone numbers with
the restricted leading dig its cannot be
dialed out. Y ou can assign up to eight
restricted numbers (u p to 1 1 digits each) to
the base unit and cordless han dset(s). If a
user attempts to dial a restricted number
“Call restriction ” is displayed.
Note:
L For example, if “ 123” is set as a
restricted number , calls cannot be made
to numbers that begin with “123”.
L Emergency numbers can be dialed
regardless of this feature. The default i s
set to 91 1.
T o set up call restriction
1 While the base unit is in standby mode, press {MENU }.
2 Scroll to “Initial setting ” by
pressing {< } or {> } , then press
{ENTER }.
3 Scroll to “Set telephone line” by
pressing {< } or {> } , then press
{ENTER }.
4 Scroll to “Call restriction ” by
pressing {< } or {> } , then press
{ENTER }.
L The current setting s are displayed, if
set.
5 Press {f} or {g }, or use the keypad
keys ({1 } to {8 } ), to assign a number
between 1 and 8.
Note:
L Up to eight restricted numb ers can be
stored, and e ach one is assigned a
unique number betwee n 1 and 8.
6 Press {< } to select the number.
7 Enter the restricted telephone number (up to 11 digi ts), or leading digits.
L Press {CLEAR } to erase one digit .
L Press and hold {CLEAR} to erase the
entire number .
8 Press {< } to select “ Ext. #: ”.
9 Using the keypad keys or the {INTERCOM }/ {TRANSFER } key,
enter the extension numbers ({1 } to
{8 }) which cannot dial the restricted
number. Enter {0 } for the base unit.
L Press {INTERC OM ALL} to select all
extensions and the base uni t.
L Press {INTERC OM ALL} again or
{CLEAR } to de-select all extensions
and the base unit.
Selec t
Selec t
Save
Base Unit Example:
Call restriction: 1
Ext.#:
No.: 1211
1-34----0
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0