Programmable Settings 82 For assistance, please visit http://www.panasonic.co m/phonehelp
Display options Adjusting the LCD contrast
Y ou can adjust the base unit and cordless
handset display contrast. There are six
levels; the default setting is level three.
Note:
L Programming must be carried out
separately for the base unit and cordless
handset(s).
Base unit LCD contrast
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {< } or {> } , then press
{ENTER }.
3 Scroll to “LCD contrast ” by pressing
{< } or {> }, then press {ENTER }.
4 Press {< } or {> } repeatedly to select
the desired contrast.
L The contrast changes with each
selection.
5 Press {ENTER }.
L Confirmation tone is heard.
Cordless handset L CD contrast
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {V} or {^} , then press .
3 Scroll to “LCD contrast ” by pressing
{V} or {^}, then press .
4 Press {V} or {^} repeatedly to select
the desired contrast.
L The contrast changes with each
selection.
5 Press . L Confirmation tone is heard.
Changing the name of the cordless handset On initial registration, the cordless
handset(s) defaults to Handset 1,
Handset 2, etc.
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {V} or {^} , then press .
3 Scroll to “Change HS name ” by
pressing {V} or {^} , then press .
L The cordless handse t displays it s
default name, for example,
Handset
1
, unless modif ied by another user .
4 Enter a name. L Press {f} to move the cursor back one
character , or press {g} to move the
cursor forward one character . Press
{CLEAR } to erase one character . T o
clear all characters, press and hold
{CLEAR } for three seconds.
L The maximum length of a stored name
is 13 ch aracters .
L T o insert a sp ace, press {0 }.
5 Press . L Confirmation tone is heard.
Handset Base Unit Selec t
Selec t
Save
Example:
Handset Selec t
Selec t
Enter HS name:
Back Save
Bedroom 2
Save
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0