For assistance, please visit http://www.panasonic.com/phonehelp 57
Creating and sending messages
The base unit user or cordless handset
user can send an identical message of up
to three minutes, to several mailboxes in
a single operation.
Using the base unit
1While in standby mode, press F.
L“This is the general delivery mailbox.” is
announced.
LIf there is one new message, “You have
one new message.” is announced.
LIf there is more than one new message,
“You have <number> new messages.”
is announced.
LIf you have more than 100 new
messages, “You have more than 100
new messages.” is announced.
LIf you have no new messages, “You
have no new messages.” is announced.
2Scroll to “Deliver message” by
pressing {<} or {>}, then press
{ENTER}.
L“Enter the destination mailbox number.”
is announced.
3 Key-in the desired mailbox number
using the corresponding keypad keys
({0} to {8}), or {INTERCOM}{1} to {8}.
LPress {INTERCOM ALL} to select all
mailboxes, press it again to de-select all
mailboxes.
LPress {CLEAR} to erase the displayed
mailbox number.
4Press {ENTER}.
L“Message record” is displayed.
5 Press {g}.
L“Please leave a message at the tone.
To end recording, press 1.” is
announced.
6 After the tone, talk clearly, about 8
inches (20 cm) away from the
microphone. To end, press {1}.
LTo change the message, press {1} and
record the message again.
LAfter recording “The message is” is
announced followed by the recorded
message.
7Press {2} to accept the recording.
LThe message is automatically delivered
to the specified mailbox.
L“Message transferred via mailbox
<mailbox number> and mailbox
<mailbox number>...” is announced.
LIf an invalid mailbox is entered in step 3,
“Incorrect entry.” is announced. Key-in
the correct mailbox number at the
prompt.
Note:
L If the elapsed recording time exceeds
three minutes, recording will stop.
Using the cordless handset
1 While in standby mode, press .
LIf the direct handset access mode is
OFF (page 52), enter the mailbox
password, then press .
LIf you have new messages, listen to all
of them.
L“Mailbox <mailbox number>.” is
announced.
LIf there is one new message, “You have
one new message.” is announced.
LIf there is more than one new message,
“You have <number> new messages.”
is announced.
LIf you have more than 100 new
messages, “You have more than 100
new messages.” is announced.
LIf you have no new messages, “You
have no new messages.” is announced.
2Scroll to “Deliver msg.” by pressing
{V} or {^}, then press .
L“Enter the destination mailbox number.”
is announced.
LUnregistered cordless handsets are not
displayed.
Base Unit
Handset
M.box
Next
Select
Manual
View the manual for the Panasonic KX-TG4500 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TG4500 or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0