Making/Answering Calls 36 For assistance, please visit http://www.panasonic.co m/phonehelp
Transferring a call Y ou can transfer an external call between
the base unit and a cordless han dset, or
between two cordless handsets.
Note:
L If the paged party does not answer
within 30 seconds a fter you hang up, the
transferred call will be returned to you
with an audible tone. If th e call is still not
answered after 10 minutes, the
automated attendant will respond to the
caller (page 66). Y ou may answer the
call by pressing the relevant line key
before the tone or before the automated
attendant takes the call.
L Any user can accept a transferred call by
pressing the relevant line key .
L For information on transferring a call to a
mailbox, refer to “T ransferring a call to a
personal mailbo x” on page 58.
Using the base unit 1 During a call, press the corresponding TRANSFER key ( {1 } to {8 }) to page the
cordless handset.
To page all cordless handsets, press
TRANSFER { ALL}.
L The call is put on ho ld and the l ine
indicat or flashe s.
L If you pres s TRANSFER {ALL }, only
the cordl ess handse t user who
answers first ca n take the tran sferred
call.
2 If required, wait for the cordless handset user to answer a nd announce
the transfer. If not required, go to step 3.
L If the paged party do es not answer,
press the re levant line key .
3 To complete the transfer, replace the handset or press {SP-PHONE }.
Answering a ca ll transferred to the base
unit
When the base unit rings, lift the handset
or press {SP-PHONE }.
L After the paging p arty hangs up, you can
talk to the outside caller .
L Y ou can press the relevant line key
instead of pressing {SP-PHONE } to talk
to the outside caller .
Using the cordless handset 1 During a call, pre ss {INTERCOM }/
{HOLD }/ {TRANSFER }.
2 Press {V} or {^} to scroll to the required
cordless handset or base un it, or press
{0 } to {8 }.
Press {*} to select the base unit and
all cordless handsets.
3 Press or {OK }.
4 If required, wait for the paged party to answer, announce the transfer.
If not required, go to step 5.
L If the paged party do es not answer,
press the re levant lin e key .
5 To complete the transfer, press {OFF }
or place the handset on the charger.
Answering a call tr ansferred to a
cordless hand set
When the handset rings, press {C} or
{s}, or lift the handset off the charger .
L After the paging p arty hangs up, you can
talk to the outside caller .
L Y ou can press the relevant line key
instead of pressing {C} or {s} to talk
to the outside caller .
Base Unit Handset Selec t
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0