Preparation 24 For assistance, please visit http://www.panasonic.co m/phonehelp
Setting-up the unit before use Setting the date and time We recommend that you set the date and
time.
V oice Date/Time S tamp: After each
message playback, a synthe sized voice
will announce the date and time that the
message was recorded (pages 53 and
55).
Note:
L If a power failure o ccurs, the date/time
will be retained for at least 20 minutes
with the backup battery fully ch arged
(page 1 1). Re-adjust if the date/time is
incorrect.
L For Caller ID service users (page 47)
– If the time is set to adjust automatically
(page 89), the Caller ID information
can set the clock after the first ring if
the time is incorrect.
– If the time is set to adjust
automatically , the Caller ID
information will automatically ad just
the clock for daylight saving time .
1 While in standby mode, press {MENU }.
2 Scroll to “Date and time ” by pressing
{< } or {> }, then press {ENTER }.
3 Set the date and time using the keypad keys ({0 } to {9 } ). Use the {f} or {g}
keys to move the cursor to the digit to
change, then press the correct n umber
key.
L Enter the ti me in 12-hour not ation. Do
not use mil it ary time.
4 Press {< } or {> } and hold, to select
“AM ” or “ PM ”.
5 Press {ENTER } .
L Confirmation tone is heard.
Setting the display language
Y ou can select either “English ” or
“Español ” as the display language. The
default is “English ”. Y ou must program
the base unit and each cordless handse t
separately .
Note:
L Changing the display langua ge also
changes the voice p rompts to the
selected language.
Specifying the base unit langua ge
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {< } or {> } , then press
{ENTER }.
3 Scroll to “Change language ” by
pressing {< } or {> } , then press
{ENTER }.
4 Press {< } or {> } to select the desired
language.
5 Press {ENTER } .
L Confirmation tone is heard.
Specifying cordless handset language
1 Press {MENU }.
2 Scroll to “Initial setting ” by
pressing {V} or {^}, then press .
3 Scroll to “Change language ” by
pressing {V} or {^}, then press .
4 Press {V} or {^} to select the desired
language.
5 Press . L Confirmation tone is heard.
Example:
Base Unit Date: 04.28.2006
>
=PM
Time: 02:37 AM
ENTER=Save
Base Unit Handset Selec t
Selec t
Save
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0