Panasonic KX-TCD240E manual

Panasonic KX-TCD240E
9.7 · 1
PDF manual
 · 76 pages
English
manualPanasonic KX-TCD240E

Multi-unit Operation

55
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333

Operating additional units

Additional handsets

Up to 6 handsets can be registered to a
single base unit. Additional handsets will
give you the freedom to, for example, have
an intercom call with another handset while
a third handset is on an outside call. See
page 6 for information on ordering additional
handsets.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 6. If other model handset is
used, certain operations (handset
settings, base unit settings, etc.) may not
be available.

Additional base units

Handsets can be registered to up to 4 base
units, allowing you to add additional base
units and extend the area in which your
handset(s) can be used. If a handset moves
out of range of its base unit when Auto is
selected on base unit selection (page 56), it
will look for another base unit to make or
receive calls. A base unit and the handsets it
communicates with is called a “radio cell”.
Note:
L Calls will be disconnected when the
handset moves from one radio cell to
another.
L Intercom calls and call transfers are only
possible between handsets in the same
radio cell.

Registering a handset to a

base unit

To register an additional handset to a
base unit (easy registration)
The included handset and base unit are
preregistered. After purchasing an
additional handset, register it to the base
unit. Ensure that the additional handset is
switched on. If it is not on, press and hold
{ih} for few seconds to turn the handset
on.

1 Lift the additional handset and press

{ih} to put the handset in standby
mode.
2 Press and hold {x} on the base unit for
about 3 seconds, until the registration
tone sounds.

3 Place the additional handset on the

base unit. The registration tone
continues to sound. With the handset
still on the base unit, wait until a
confirmation tone sounds and w stops
flashing.
Note:
L If an error tone sounds, or if w is still
flashing, register the handset manually
(manual registration; page 55).
L Charge the batteries of your additional
handset for about 7 hours before initial
use.
L This registration method cannot be used
for handsets that have already been
registered to a base unit. Register the
handset manually (manual registration;
page 55).
TCD240E(e).book Page 55 Thursday, June 9, 2005 9:14 AM

Manual

View the manual for the Panasonic KX-TCD240E here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-TCD240E or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic KX-TCD240E specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-TCD240E.

General
BrandPanasonic
ModelKX-TCD240E
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-TCD240E below.

Is the manual of the Panasonic KX-TCD240E available in English?

Yes, the manual of the Panasonic KX-TCD240E is available in English .

Is your question not listed? Ask your question here

No results