Panasonic KX-MB1520SP manual

Panasonic KX-MB1520SP
8.4 · 1
PDF manual
 · 88 pages
English
manualPanasonic KX-MB1520SP
Feature/Code Selection
Sending documents
overseas
MBNM4NM1NM1N
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
M0N OFF: Deactivates this feature.
M1N NEXT FAX: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
M2N ERROR (default): When the previous fax transmission fails and you wish
to re-send the document.
Note:
R Calling charges may be higher than usual.
Sending a fax at a specific
time
MBNM4NM1NM2N
This feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
M0N OFF (default)
M1N ON
To send a document:
1. If the MFaxN light is OFF, turn it ON by pressing MFaxN repeatedly.
2. Set the original (page 19).
3. If necessary, change the contrast (page 36) and the resolution (page 36).
4. MMenuN A MBNM4NM1NM2N
5. Press M1N to select ON. A MSetN
6. Enter the fax number.
R To enter an item using phonebook, see step 3 on “6.3 Sending a fax
using phonebook”, page 38. (When using phonebook, you do not have
to press MEN before pressing MCN or MDN.)
7. MSetN
8. Enter the transmission start time.
R If you selected 12-hour time entry (page 20), press MHN repeatedly to
select AM or PM.
R If you selected 24-hour time entry (page 20), the time is set using
24-hour time entry.
9. MSetN A MStartN
R The document will be scanned into memory. The unit will then send the
data at the specified time. You cannot use this feature for another fax
transmission until the former sending is completed.
Note:
R To cancel this setting after programming, press MStopN while the unit is idle,
and then press MSetN.
Setting the Error Correction
Mode (ECM)
MBNM4NM1NM3N
This feature is available when the sending / receiving fax machines are ECM
compatible.
M0N OFF: Deactivates this feature.
M1N ON (default): Fax transmission / reception will be carried out so that the
errors do not occur.
Setting the connecting tone
MBNM4NM1NM6N
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
M0N OFF: Deactivates this feature.
M1N ON (default): You will hear connecting tones.
Note:
R If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
R The connecting tone volume cannot be adjusted.
56

8. Programmable Features

Manual

View the manual for the Panasonic KX-MB1520SP here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-MB1520SP or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic KX-MB1520SP specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-MB1520SP.

General
BrandPanasonic
ModelKX-MB1520SP
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-MB1520SP below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Panasonic KX-MB1520SP available in English?

Yes, the manual of the Panasonic KX-MB1520SP is available in English .

Is your question not listed? Ask your question here

No results