Panasonic KX-HNS102 manual

Panasonic KX-HNS102
6.7 · 1
PDF manual
 · 132 pages
English
manualPanasonic KX-HNS102
Motion sensors: Enabled
Water leak sensors: Enabled and cannot be disabled
Glass break sensors: Enabled
Garage door sensors: Enabled
Indoor camera motion detection features: Disabled
Outdoor camera motion detection features: Enabled
Disarm
Use this mode to turn off the alarm system.
R Water leak sensors can always trigger the alarm system, even when this mode is selected.
Confirming the current arm mode
The icons displayed near the top of the home screen indicate the current arm mode.
See “Arm mode icons”, Page 38 for details.
Changing the current arm mode
Tap the icon of the desired arm mode at the top of the [Home Network] app home screen.

Alarm system settings

You can customize settings for [Arm: At Home] mode and [Arm: Away] mode to suit your needs.
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Arm Settings].

3 Select which type of settings you want to change.

[Arm Settings (At Home)]: The settings you change will be applied when the arm mode is set to
[Arm: At Home].
[Arm Settings (Away)]: The settings you change will be applied when the arm mode is set to
[Arm: Away].
[Alert by Phone Call]: See “Alert by phone call”, Page 54.
[Change Arm PIN]: See “Alarm system PIN”, Page 56.

4 Select the desired setting.

5 Change the settings as desired.

R Each setting is explained in this section.

6 Follow the on-screen instructions.

Enabling and disabling individual sensors
While configuring the settings for an arm mode, tap the name of the desired sensor and then select the
desired operating mode.
[Enable]: This setting enables the selected sensor during the corresponding arm mode.
[Enable (Entry Delay)]: This setting is the same as when [Enable] is selected, but an entry delay is
also applied. For more information, see “Entry delay time and alert volume (available for [Arm: Away]
mode and [Arm: At Home] mode)”, Page 54.
[Disable]: This setting disables the selected sensor during the corresponding arm mode.
Exit delay time and alert volume (available for [Arm: Away] mode only)
The exit delay can give you time to leave the house before the alarm system is armed. This setting
determines the amount of time.
When you change the arm mode to [Arm: Away], the exit delay begins counting down. During this time,
the alarm system cannot be triggered.
53

Using the app

Manual

View the manual for the Panasonic KX-HNS102 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-HNS102 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic KX-HNS102 specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-HNS102.

General
BrandPanasonic
ModelKX-HNS102
Productphone
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-HNS102 below.

Is the manual of the Panasonic KX-HNS102 available in English?

Yes, the manual of the Panasonic KX-HNS102 is available in English .

Is your question not listed? Ask your question here

No results