Panasonic KX-HNS102 manual

Panasonic KX-HNS102
6.7 · 1
PDF manual
 · 132 pages
English
manualPanasonic KX-HNS102

2 Tap [Wireless Access Point].

3 Select the wireless access point that you want to delete and then tap [Delete].
Note:
R You cannot delete the wireless access point that your mobile device is currently connected to.
[Port Forwarding] settings
These settings are only required if you need to configure your wireless router’s port forwarding feature in
order to access the hub while away from home.
Important:
R In order to use this feature, you must first configure the hub to use a static IP address ( “Changing IP
settings”, Page 112).
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Wi-Fi Settings].

3 Tap [Port Forwarding].

4 Turn on the [Enable] radio button.

5 Tap the field next to [Port A] and then enter the desired port number.
Repeat this step for [Port B] and [Port C].
R A value must be assigned to each port.
R Only port numbers 62000–63000 can be assigned.
R Configure your wireless router’s port forwarding feature to forward these ports to the static IP
address that you have assigned to the hub.

6 When finished, tap [OK].

[MTU Settings] (maximum data size setting)
This setting affects how data is sent over the network. Typically this setting does not need to be changed.
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Wi-Fi Settings].

3 Tap [MTU Settings].

4 Select the desired value and then tap [OK].

Setting the hub’s Wi-Fi settings again

If your wireless router’s SSID (i.e., network name) or password changes, or if you replace your wireless
router with a new one that uses a different SSID or password, you will need to set the hub’s Wi-Fi
settings again.
If a cordless handset is registered to the hub, you can use the cordless handset to set the hub’s Wi-Fi
settings. Refer to the Wi-Fi settings information in the operating instructions included with your cordless
handset.
1 Press and hold the 3 registration buttons on the side of the hub and the Wi-Fi SETUP button on the
back of the hub at the same time (4 buttons total) until the hub’s LED indicator blinks in green and
yellow.

2 Wait for the hub’s LED indicator to light in yellow.

3 From the [Home Network] app home screen, open the options menu (see “Displaying the options
menu”, Page 39).
4
If your mobile device is registered to only one hub
Tap [Deregistration from Hub] ® [OK].
113

Using the app

Manual

View the manual for the Panasonic KX-HNS102 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-HNS102 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic KX-HNS102 specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-HNS102.

General
BrandPanasonic
ModelKX-HNS102
Productphone
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-HNS102 below.

Is the manual of the Panasonic KX-HNS102 available in English?

Yes, the manual of the Panasonic KX-HNS102 is available in English .

Is your question not listed? Ask your question here

No results