Panasonic KX-HNS102 manual

Panasonic KX-HNS102
6.7 · 1
PDF manual
 · 132 pages
English
manualPanasonic KX-HNS102

Hub firmware

You can use this feature to check for a newer version of the hub firmware (i.e., system software). If a
newer version is found, you can update the firmware.
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [General].

3 Tap [Firmware Update].

R The hub will access the Internet and check for a newer version of its firmware.

4 Follow the on-screen instructions.

If the “firmware update is available” message is displayed automatically
If the hub finds that a firmware update is available, it will display a message automatically that prompts
you to update the firmware. Follow the on-screen instructions to update the firmware.

Network features

Confirming network information
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Wi-Fi Settings].

3 Tap [Current Status].

Changing IP settings
Typically these settings should not be changed.
1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Wi-Fi Settings].

3 Tap [IP Settings].

4 Select the desired IP address mode.

R In most cases [Auto (DHCP)] is preferred. In this case, no other settings are available on this
screen.
R If you select [Manual (Static)], other settings on this screen become available. If these settings
are not configured to match your wireless router’s requirements, the hub will not be able to connect
to your wireless router and all app features will become unavailable.
5 Configure the settings as needed and then tap [OK].
Note:
R If you make a mistake while configuring the hub to use a static IP address and you can no longer
access the hub, reset the hub’s Wi-Fi settings and set up the hub again (see “Setting the hub’s Wi-Fi
settings again”, Page 113).
Deleting wireless access points
The app remembers the SSIDs of wireless routers that you use at home to access the system; it can
remember 10 SSIDs, and saves them in the wireless access point list. If the list is full and you try to
access the system using a new SSID while at home, the app may connect to the hub over the Internet
even though you are at home, i.e., [Remotely Connected] will be displayed at the top of the home
screen. In this case, we recommend deleting unused SSIDs from the wireless access point list.
1 From the [Home Network] app home screen, open the options menu (see “Displaying the options
menu”, Page 39).
112

Using the app

Manual

View the manual for the Panasonic KX-HNS102 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-HNS102 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic KX-HNS102 specifications

Below you will find the product specifications and the manual specifications of the Panasonic KX-HNS102.

General
BrandPanasonic
ModelKX-HNS102
Productphone
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic KX-HNS102 below.

Is the manual of the Panasonic KX-HNS102 available in English?

Yes, the manual of the Panasonic KX-HNS102 is available in English .

Is your question not listed? Ask your question here

No results