3. Telephone 50
3 When the paged party answers, talk into {MIC }.
4 T o end the interc om call, press {SP-PHONE }
or {LOCA T OR/INTERCOM}.
3.14.2 Answering intercom calls Handset
When a handset is being paged , it will ring and
the Ringer/Message aler t indicator will flash
rapidly . The displa y will sho w the paging
ex tension’ s number .
1 Press {TA L K}, { SP-PHONE} or
{HOLD/INTERCOM } to answ er the page .
2 T o end the intercom call, press {OFF } or
place the handset on the charger .
Base unit
When the base unit is being paged, it wi ll r ing
and displa y the paging ex tens ion’ s number .
1 Press {LO CA T OR/INTERCOM} or { SP-
PHONE} to ans wer the page.
2 T o end the interc om call, press {SP-PHONE }
or {LOCA T OR/INTERCO M}.
Note:
L The ring er v olume f or int ercom ca lls fo llows
the higher le vel of the 2 lines .
When the ringer volume is OFF f or both lines
(page 28, 29), the handset and the base unit
will ring at the low le vel when paged .
3.15 Transferring a call A telephone call can be tr ans f erred between two
ex tens ions using the intercom f eature.
L K eep the front cover page open f or button
locations .
3.15.1 To transfer a call from the handset 1 During a phone call, press {HOLD/INTERC OM }.
L{LINE 1} (soft ke y ) or {LINE2 } (soft key )
flashes and the call will be put on hold.
2 T o page t he base unit, press {0 }.
T o pa ge anothe r hand set, enter its
extens ion number ({1 } to {4 }).
L If you do not wis h to announce the
transf er , skip to step 4.
3 Wait for the paged party to answer. L If the paged par ty does not ans wer , pres s
{LINE 1} (soft ke y ) or {LINE2 } (soft key)
that is fl as hing to return to the phone call.
4 T o complete the transf er , pres s {OFF}.
To answer a transferred call with the base unit: – If the paging par ty announces the
transfer, the paging e xtension’ s number is
displa yed. Press {SP-PHONE } or
{LOCA T O R/INTERCOM} to ans wer the
page.
L After the paging party hangs up the call,
you c an talk to the outside caller .
– If the paging par ty hangs up before you
answer the page, “INCO MING CALL ” will
be displa yed. Press {SP-PHONE } , or
{LINE 1} or { LINE2} that is flashing to tak e
the transf erred call.
To answer a transferred call with another handset: – If the paging par ty announces the
transfer, the calling e x tension will be
displa yed. Press {TA L K }, {SP-PHONE } or
{HOLD/INTE RCOM } to ans wer the page.
L After the paging party hangs up the call,
you c an talk to the outside caller .
– If the paging par ty hangs up before you
answer the page, “Inco ming call ” will
be displa yed. Press {TA L K }, {SP-PHONE },
or {LINE1 } (soft key) or {LINE2 } (soft ke y) f or
the called line to tak e the transferred call.
3.15.2 To transfer a call from the base unit 1 During a phone call, press {TRA NSF ER }.
L{LINE 1} or { LINE2} flashes and the call
will be put on hold.
During an intercom call
L If you ha ve difficulty hearing the other
par ty , dec rease the speaker v olume.
L If you receiv e a phone call while talking on
the intercom, you will hear 2 tones (f eature
#73 on page 83, f eature 13 on page 88 or
feature 0* 2 on page 90) and k or l
on the handset, or {LINE1 } or {LINE2 } on
the base unit will flash rapidl y . T o answ er
the call, if you are us ing the handset,
select the call ed line b y pressing {LINE1 }
(soft ke y) or {LINE2 } (s oft ke y). If you are
using the base unit, select the called li ne
by pressing {LINE1 } or {LIN E2}.
FG6550-PFQX2225ZA-en. book Page 50 Monday, August 8, 2005 8:16 PM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0