3. Telephone 41
2. Press {1} to select “1=Pho ne boo k ”.
3. Press {v } or {e} rep eatedly to displa y the
desired item.
4. Press { CALL} (soft k ey) .
L The unit will star t dialing automaticall y .
L If required, repeat steps 1 to 4 f or any
remaining numbers .
Note:
L If you ha v e rotar y or pulse ser vice, y ou need
to press {*} bef or e pressing {MENU } in
step 1 to change the dialing mode
temporarily to tone.
L T o prev ent misdialing, we recommend y ou
add pauses where needed when storing
numbers. F or example , add pauses after a
telephone number when storing in the phone
book (page 39) if a PIN number is to be dialed
after it.
3.5.2 With the base unit 1 Press {>} . 2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {SP-PHONE}.
L An a vai lab le line is automatic ally select ed
and {LINE1 } or {LINE 2} will light. T o
change the line selection, see feature #37
on page 81 and feature 0*5 on page 90.
L Y ou can als o select a line b y pressing
{LINE1 } or {LINE2}.
To search for a name by initial Example: “LISA ”
1. Press {> }.
2. Press {A } or {B} to initiate the phone book.
3. Press {5} repeatedly to displa y any name
with the initial “L ” (see the character tab le,
page 32).
L T o search for symbols , press {1 }.
4. Press {B } repeatedly to displa y “LISA ”.
L T o stop the search, press {ST O P}.
L T o dial the displa yed number , press {SP-
PHONE}. An a vai lab le line is
automatically selec ted and {LINE1 } or
{LINE2 } will light. T o change the l ine
selection, see fe ature #37 on page 81 and
feature 0* 5 on page 90.
Y ou can also select a line b y pressing
{LINE1 } or {LINE2 }.
3.6 Editing a stored item L K eep the front cover page open f o r button
locations.
3.6.1 With the handset Make sure the handset is not being used .
1 Press {MENU }, then {*}.
2 Press {v } or {e} repeatedly to display the
desired item.
3 Press {EDIT } (soft k ey).
L If you do not need to edit the name , skip
to step 5.
4 Edit the name. For further details, see the stor ing procedure on page 39.
5 Press {v}. L If you do not need to edit the telephone
number , skip to step 7.
6 Edit the telephone number. For further details, s ee the storing procedure on page
39.
7 Press {v}. 8 Press {SA VE} (soft ke y).
9 Press {OF F}.
3.6.2 With the base unit 1 Press {>}. 2 Press {A } or {B} re peatedly to displa y the
desired item.
3 Press {MENU }.
4 Press {*}. L If you do not need to edit the name , skip
to step 6.
5 Edit the name. For further details, see the stor ing procedure on page 39.
6 Press {SET}.
L If you do not need to edit the telephone
number , skip to step 8.
7 Edit the telephone number. For further details, s ee the storing procedure on page
39.
8 Press {SET}.
FG6550-PFQX2225ZA-en. book Page 41 Monday, August 8, 2005 8:16 PM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0