3. Telephone 38
3.2.2 With the base unit 1 Press {SP-PHONE} and talk into { MIC}.
L The called l ine is auto matically selected.
T o change the line selection, see f eature
#37 on page 81 and f eature 0*5 on page
90).
L Y ou can als o ans wer a call b y selecting
the called line by pressing {LINE1 } or
{LINE2 }.
2 When finished talking, press {SP-PHONE },
or {LINE1 } or {LINE2 } that is lit on the base
unit.
3.3 Using the other line during a conversation When a call is being recei ved on the other l ine
during a conversati on, you will hear 2 tones. k
or l on the handset, or {LINE1 } or {LINE2 }
on the base unit will flash r apidly .
Y ou can ans wer th e second call while holding the
first call. Y ou can also mak e a call without
terminating the first call.
L K eep the front cov er page open f or b utton
locations .
3.3.1 Handset 1 Example: If you are using LINE 1 Press {HOLD/INTERCOM} 2 times to put
the first call (LINE 1) on hold.
L{LINE1} (s oft k ey) flas hes on the display .
2 Press {LINE 2} (soft k ey ) to make or ans wer
a seco nd call .
L T o hold the second call, press
{HOLD/INTER COM } 2 ti mes.
3 To return to the first call (LINE 1), press {LINE1 } (soft ke y).
L The second call is terminated.
3.3.2 Base unit 1 Example: If you are using LINE 1 Press {HO LD } to put the fi rst call (LINE 1) on
hold.
L{LINE1} flashes .
2 Press {LINE2} to make or answ er a second
call.
L{LINE2} lights .
L T o hold the second call, press {HOLD }.
3 To return to the first call (LINE 1), press {LINE1 }.
L The second call is terminated.
Note:
L Y ou can turn O FF the 2 tones (Incoming call
tone). See feature #73 (page 83), f eature 13
(page 88) and f eature 0* 2 (page 90).
L If y ou subscribe to Caller ID , the second
caller’ s information will be displa yed when a
call is being recei ved on the other li ne (page
44).
Auto matic Dial ing
{SP-PHONE } {MIC } {LINE1 } {LINE2 } FG6550-PFQX2225ZA-en. book Page 38 M onday, August 8, 2005 8:16 PM
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0