RIf you receive an outside call while talking on the
intercom, you hear interrupt tones. To answer the
call, hang up the intercom, then answer the outside
call.
–see step 3 on “3.1.1 With the cordless handset”,
page 24.
–see step 3 on “3.1.2 With the base unit”,
page 24.
MRECALLN / MN cannot be used to answer
outside calls.
RWhen paging the cordless handset, the paged
cordless handset beeps for 1 minute.
8.3.1 Making intercom calls
With the cordless handset
1
A
2To page the base unit, press M0N.
To page another cordless handset, press the
desired cordless handset number.
RThe base unit or the destination cordless handset
will beep (be paged) for 1 minute.
RTo stop paging, press M
N.
3 When the paged party answers, talk into the cordless
handset.
4 To end the intercom call, press M N.
With the base unit
1 MINTERCOMN
2 To page one cordless handset, press the desired
cordless handset number.
To page all cordless handsets, press M0N.
RThe destination cordless handset(s) will beep (be
paged) for 1 minute.
RTo stop paging, press MSP-PHONEN or
MINTERCOMN.
3When the paged party answers, talk into MMICN.
4To end the intercom call, press MSP-PHONEN or
MINTERCOMN.
Cordless handset locator
You can locate a misplaced cordless handset by
pressing MLOCATORNM0N on the base unit.
RAll registered cordless handsets beep for 1 minute.
To stop paging, press MLOCATORN again.
8.3.2 Answering intercom calls
With the cordless handset
When the cordless handset is being paged, it will beep
(be paged) and the ringer indicator will flash rapidly. The
display will show the paging extension’s number.
1 Press M
N or MN to answer the page.
2 To end the intercom call, press M N.
With the base unit
When the base unit is being paged, it will beep and
display the paging extension’s number.
KX-FC275:
1Press MSP-PHONEN, MINTERCOMN or lift the
handset to answer the page.
2To end the intercom call, press MSP-PHONEN,
MINTERCOMN or replace the handset.
KX-FC265:
1Press MSP-PHONEN or MINTERCOMN to answer the
page.
2To end the intercom call, press MSP-PHONEN or
MINTERCOMN.
8.4 Transferring a call/conference
Outside calls can be transferred between a cordless
handset and the base unit, and between 2 cordless
handsets using the intercom feature.
8.4.1 To the base unit or another cordless
handset (using the cordless handset)
1 Cordless handset:
During an outside call, press to put the call on
hold.
R
flashes to indicate the outside call is on hold.
2 Cordless handset:
To page the base unit, press M0N.
To page another cordless handset, press the
desired cordless handset number.
3 Base unit (KX-FC275):
Press MSP-PHONEN or lift the handset to answer the
page.
Base unit (KX-FC265):
Press MSP-PHONEN to answer the page.
Another cordless handset:
Press M
N or MN to answer the page.
4 Cordless handset:
To complete the transfer, press MN.
To establish a conference call, press M3N.
RTo leave the conference, press MN. The other
parties can continue the conversation.
Note:
RAfter the paging party disconnects, you can talk to the
outside caller.
Transferring a call without speaking to the base unit
user/other cordless handset user
After step 2, press MN.
RThe outside call rings at the base unit or the other
cordless handset.
51
8. Multi-unit Operation
Manual
View the manual for the Panasonic KX-FC275E here, for free. This manual comes under the category fax machines and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-FC275E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0