RDo not send the following types of documents: (Make
a copy of the document using another copier and
send the copy.)
–Chemically treated paper such as carbon or
carbonless duplicating paper
–Electrostatically charged paper
–Badly curled, creased or torn paper
–Paper with a coated surface
–Paper with a faint image
–Paper with printing on the opposite side that can
be seen through the other side, such as newsprint
RCheck that ink, paste or correction fluid has dried
completely.
RTo send a document with a width of less than 210
mm, we recommend using a copy machine to copy
the original document onto A4 or letter-sized paper,
then sending the copied document.
4.3 Sending a fax using the
phonebook and one touch dial
Before using this feature, store the desired names and
telephone numbers into the base unit’s phonebook
(page 26) and the base unit’s one touch dial (page 26).
1 Adjust the width of the document guides to fit the
actual size of the document.
2 Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.
3If necessary, press MJN or MKN repeatedly to select
the desired resolution (page 30).
4 Using the phonebook:
1.MPHONEBOOKN
2.Press MJN or MKN repeatedly to display the
desired item. AMFAX STARTN
Using one touch dial:
1.Press and hold the desired one touch dial key
(M1N to M9N).
RYou can view other one touch dial
assignments by pressing MJN or MKN.
2.MFAX STARTN
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number up to 5 times.
RTo cancel redialling, press MSTOPN.
4.4 Broadcast transmission
By storing the base unit’s phonebook items (page 26)
into the broadcast memory, you can send the same
document to multiple parties (up to 20). Your
programmed items will remain in the broadcast memory,
allowing frequent re-use.
4.4.1 Programming items into the broadcast
memory
1Press MMENUN repeatedly to display “BROADCAST
SET”. AMBN
2Press MJN or MKN repeatedly to display the desired
item. AMSETN
RThe number in brackets indicates the number of
registered items.
RIf you have programmed the wrong item, press
MSTOPN to erase the item.
RTo program other items, repeat step 2 (up to 20
items).
3 MSETN
4.4.2 Adding a new item into the broadcast
memory
1 MPHONEBOOKN
2Press MJN or MKN repeatedly to display
“<BROADCAST>”. AMMENUNAMGN
3Press MJN or MKN repeatedly to display the desired
item. AMSETN
RTo add other items, repeat step 3 (up to 20 items).
4 MSTOPN
4.4.3 Erasing a stored item from the
broadcast memory
1 MPHONEBOOKN
2Press MJN or MKN repeatedly to display
“<BROADCAST>”. AMMENUNAMBN
3Press MJN or MKN repeatedly to display the desired
item you want to erase.
RTo cancel erasing, press MSTOPN.
4MSETNAMSETNAMSTOPN
4.4.4 Sending the same document to
pre-programmed parties
1 Insert the document FACE DOWN.
2If necessary, press MJN or MKN repeatedly to select
the desired resolution (page 30). A
MPHONEBOOKN
3Press MJN or MKN repeatedly to display
“<BROADCAST>”. AMFAX STARTN
RAfter transmission, the unit will automatically print
a report (Broadcast sending report).
31
4. Fax
Manual
View the manual for the Panasonic KX-FC275E here, for free. This manual comes under the category fax machines and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Panasonic KX-FC275E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0