Panasonic ES-7036 manual

Panasonic ES-7036
8.4 · 3
PDF manual
 · 168 pages
English
manualPanasonic ES-7036
2
English

Important

Before use
Before use
Make sure skin is clean before and after use. Failure to do so might cause
infection and infl ammation.
Do not use the appliance if you have eczema, rashes, sensitive skin,
proneness to infections, varicose veins, diabetes, hemophilia or poor blood
clotting or other skin conditions.
Using just before swimming and sports activities or sharing with other
persons might result in bacteria entering the skin and causing damage and
infl ammation.
Turning on the appliance without an epilation or shaver head (
ES2067
)
attached might cause fi nger injury, hair entanglement in the spinning gears
or mechanical malfunction.
The followings might cause sensitive skin damage, injury, infl ammation,
pain, bleeding, and severe pain.
Using the appliance if the epilation discs, the fl oat guard/the skin
protector or the outer foil have been damaged.
Using on or near your face, genitals, warts, pimples, bruises, rashes,
wounds or loose skin.
Applying strong pressure to the skin, repeatedly moving over the same
area or using a jabbing motion.
Using before or during menstruation, pregnancy, about one month after
giving birth, when ill and when your skin is sunburned etc.
The appliance can be used for wet or dry epilation. The following is the
symbol for a wet epilator. It means that the appliance can be used in a bath
or shower.
Safety precautions
Never use the charger in the bathroom.
Always ensure the appliance is used on an electric power source matched
to its rated voltage.
Do not bend, twist, pull or modify the cord.
Do not wrap the cord tightly around the appliance.
Never use the appliance if the cord or the charger is damaged or overly
hot or if the plug fi ts loosely in a household outlet.
Regularly clean the cord connector to prevent dust.
Do not drop or hit the appliance as the fl oat guard/the skin protector or the
-
-
-
-
ES2067_EU.indb 2 2008/01/09 19:56:09

Manual

View the manual for the Panasonic ES-7036 here, for free. This manual comes under the category razors and has been rated by 3 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Panasonic ES-7036 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic ES-7036 specifications

Below you will find the product specifications and the manual specifications of the Panasonic ES-7036.

General
BrandPanasonic
ModelES-7036
Productrazor
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic ES-7036 below.

How do I know when it's time to replace the outer foil of the Panasonic ES-7036 razor?

To replace the outer foil of the Panasonic ES-7036 razor, follow these steps: 1. Identify the need for replacement: You should replace the outer foil when you notice reduced shaving performance. If the razor is not providing a close and smooth shave as it used to, it's time to replace the outer foil. 2. Prepare the razor: Make sure the razor is turned off and unplugged before proceeding with the replacement. 3. Remove the old outer foil: Gently push the outer foil with your fingers and use a fingernail to release the plastic panel on the blade from the catches on the inside of the frame. This will detach the old outer foil from the razor head. 4. Fit the new outer foil: Hold the new outer foil with the surface containing the plastic panel facing upward. Insert it into the frame, aligning the catches on the frame with the holes on the foil. Ensure that the new outer foil is securely fitted into place. 5. Recommended replacement frequency: It is recommended to replace the outer foil every year and the inner blade every two years for optimal performance. Remember to dispose of the old outer foil properly, following the environmental protection and recycling guidelines in your country. By following these steps, you can easily replace the outer foil of your Panasonic ES-7036 razor and maintain its shaving performance.

What should I do if the shaving performance of the Panasonic ES-7036 razor is reduced?

When the shaving performance of the Panasonic ES-7036 razor is reduced, you can take the following steps to address the issue: 1. Check the condition of the outer foil: Inspect the outer foil for any signs of damage, such as dents, scratches, or wear. If the outer foil is damaged, it may affect the shaving performance. 2. Clean the razor head: Remove the outer foil and clean the razor head thoroughly. Use a small brush or the cleaning brush provided with the razor to remove any hair, debris, or residue that may be clogging the blades. 3. Replace the outer foil: If the outer foil is worn out or damaged, it is recommended to replace it. Follow the instructions in the manual to safely remove the old outer foil and fit the new one securely into place. 4. Replace the inner blade: If replacing the outer foil does not improve the shaving performance, consider replacing the inner blade as well. The inner blade may become dull over time, affecting the overall performance of the razor. 5. Follow proper shaving techniques: Ensure that you are using the razor correctly. Wet your skin before shaving, apply shaving gel or foam, and shave in the direction of hair growth. Avoid pressing too hard on the skin, as it may cause irritation or discomfort. By following these steps, you can address the reduced shaving performance of the Panasonic ES-7036 razor and maintain its optimal performance.

Can I use any type of soap lather with the Panasonic ES-7036 razor?

Yes, you can use soap lather with the Panasonic ES-7036 razor. Here are the steps to follow: 1. Wet your skin: Before applying the soap lather, wet the area you want to shave. This helps to soften the hair and prepare it for shaving. 2. Apply the soap lather: Take a small amount of soap and create a lather in your hands. Apply the lather to the wet skin, ensuring that it covers the area you want to shave. 3. Shave with the razor: Turn on the Panasonic ES-7036 razor by pressing the power switch. Gently glide the razor over the skin in the direction of hair growth. The soap lather will make the skin slippery, allowing the razor to glide smoothly. 4. Rinse the razor: After each stroke, rinse the razor head under running water to remove any hair or soap residue. This will help to maintain the performance of the razor. 5. Repeat if necessary: If you have missed any areas or if you want a closer shave, you can reapply the soap lather and repeat the shaving process. Remember to clean the razor thoroughly after each use to remove any remaining soap residue and ensure its longevity. By following these steps, you can effectively use soap lather with the Panasonic ES-7036 razor for a smooth and comfortable shaving experience.

How do I properly attach the bikini comb to the Panasonic ES-7036 razor for shaving the bikini-line?

To properly attach the bikini comb to the Panasonic ES-7036 razor for shaving the bikini-line, follow these steps: 1. Identify the bikini comb: Locate the bikini comb accessory that comes with the Panasonic ES-7036 razor. The bikini comb is specifically designed for trimming and shaping the bikini-line. 2. Prepare the razor: Ensure that the razor is turned off and unplugged before attaching the bikini comb. 3. Place the bikini comb onto the shaver head: Align the bikini comb with the shaver head of the Panasonic ES-7036 razor. Slide the trimmer up to secure the bikini comb in place. Make sure the comb is in close contact with the skin. 4. Adjust the comb length (if applicable): Some bikini combs may have adjustable length settings. If your bikini comb has this feature, adjust the comb length according to your desired trimming length. 5. Start shaving the bikini-line: Turn on the razor by pressing the power switch. Gently glide the razor along the bikini-line, following the natural contours of your body. Take care to avoid pressing too hard to prevent skin irritation. By following these steps, you can properly attach the bikini comb to the Panasonic ES-7036 razor and achieve precise and comfortable shaving of the bikini-line.

How should I clean the epilator of the Panasonic ES-7036 razor?

To clean the epilator of the Panasonic ES-7036 razor, follow these steps: 1. Switch off and unplug the appliance: Before cleaning the epilator, make sure it is switched off and unplugged from the power source. 2. Remove the frame: Push the frame release button to detach the frame from the razor head. This will allow you to access the cleaning area. 3. Apply liquid hand soap: Apply a small amount of liquid hand soap to the discs and blade of the epilator. This will help to remove any residue or buildup. 4. Create foam: Turn on the epilator and wet the discs to create foam. This will help to clean the head and remove any hair or debris. 5. Rinse the head: Rinse the head of the epilator with water to clean away the foam and hair. Avoid using hot water, as it may damage the device. 6. Dry the epilator: Turn off the epilator and wipe it with a dry cloth to remove any excess moisture. Ensure that the device is completely dry before storing it. 7. Use the cleaning brush: Additionally, you can use the supplied cleaning brush to clean the epilation head and the shaver head. This will help to remove any remaining hair or residue. Remember to always unplug the charger from the power outlet before cleaning the epilator. Proper cleaning and maintenance will ensure the longevity and performance of your Panasonic ES-7036 razor.

Is the manual of the Panasonic ES-7036 available in English?

Yes, the manual of the Panasonic ES-7036 is available in English .

Is your question not listed? Ask your question here

No results