Panasonic DMP-BDT385 manual

Panasonic DMP-BDT385
7.5 · 3
PDF manual
 · 37 pages
English
manualPanasonic DMP-BDT385

- 29 -

Reference
Reference

Troubleshooting guide

Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.

Unit does not respond to remote

control or unit’s buttons.

Disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.
The following do not indicate a problem with
this unit:
Regular disc rotating sounds.
Image disturbance during search.

Cannot eject disc.

1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
unit’s display.
4 Press [OK].
To return to the factory defaults.
¾ Select “Yes” in “Default Settings” in the Setup
menu. (> 28)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
4 Press and hold [OK] for more than 5 seconds.
The remote control does not work properly.
¾ Change the batteries in the remote control.
(> 5)
¾ The remote control and this unit are using
different codes.
Press and hold [OK] and the displayed
number (“”) for more than 5 seconds.
The TV tuner mode is not displayed when the
TV is turned on.
¾ This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
¾ Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
This unit is turned off automatically.
¾ To save on electricity, this unit is turned off
automatically if there is no button operation
for about 20 minutes when not playing back
(such as when paused or displaying the
menu, displaying still pictures, etc.).
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory
defaults.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
4 Press [OK].
The TV screen turns black.
¾ In the following cases, HDMI authentication
takes place and a black screen is displayed:
When “24p(4K)/24p Output” is set to
“24p(4K)” or “24p”.
When the display is switched between 2D
and 3D images.
When you quit the 4K playback of a still
picture by displaying another screen,
including the HOME menu.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 14)
Image disturbance when replacing 3D discs.

General operation

“00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the unit’s
display.
If “SET ” is displayed on the unit’s display
when a button is pressed on the remote
control, change the code on the remote
control.
“00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the unit’s
display.

Manual

View the manual for the Panasonic DMP-BDT385 here, for free. This manual comes under the category blu-ray players and has been rated by 3 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic DMP-BDT385 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic DMP-BDT385 specifications

Below you will find the product specifications and the manual specifications of the Panasonic DMP-BDT385.

General
BrandPanasonic
ModelDMP-BDT385
Productblu-ray player
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic DMP-BDT385 below.

Why is my Blu-ray player not powering on?

First, please ensure that the power cord is securely plugged into both the player and a functioning power outlet. Check if the power indicator light on the player is illuminated. If not, try a different outlet. If the issue persists, it might indicate a faulty power supply that needs professional attention.

How can I connect my Blu-ray player to my TV?

To connect your Panasonic DMP-BDT385 Blu-ray player to your TV, use an HDMI cable. Connect one end of the HDMI cable to the HDMI OUT port on the back of the player, and the other end to an available HDMI IN port on your TV. Set your TV's input/source to the corresponding HDMI port to which the player is connected.

Can I use my Blu-ray player to stream online content?

Absolutely! The Panasonic DMP-BDT385 supports online streaming. Connect your player to the internet via an Ethernet cable or Wi-Fi, and access the "Internet" or "Network" menu on the player's home screen. From there, you can select popular streaming platforms, such as Netflix, YouTube, or Amazon Prime Video, and enjoy streaming content directly on your TV.

How do I update the firmware on my Blu-ray player?

Keeping your player's firmware up to date is essential for optimal performance. On the Panasonic DMP-BDT385, go to the player's home screen and access the "Setup" or "Settings" menu. Look for the "Software Update" option and select it. The player will check for available firmware updates and guide you through the process of downloading and installing them.

My Blu-ray player is not recognizing the disc I inserted. What should I do?

If your player is having trouble reading a disc, ensure that the disc is clean and free from scratches or dirt. Gently wipe the disc with a lint-free cloth and try again. If the issue persists with multiple discs, you might need to clean the player's lens. Purchase a commercially available lens cleaning disc and follow the instructions provided to clean the lens properly.

Is the manual of the Panasonic DMP-BDT385 available in English?

Yes, the manual of the Panasonic DMP-BDT385 is available in English .

Is your question not listed? Ask your question here

No results