Name: Panasonic BT-LH1760
Brand: Panasonic
SKU: 1392722
Rating: 75 (1 reviews)

manualPanasonic BT-LH1760

Main Menu (continued)

Underlined values indicate factory defaults.

*1 When the monitor is shipped, settings for “USER1” - “USER5” are identical to “FACTORY.”

*2 “H-POSITION”, “V-POSITION”, “PHASE” and “CLOCK” (J page 31) cannot be saved or loaded.

*3 When double speed is applied, image lag is reduced by inserting a black signal. However, luminance is lowered

compared to standard speed, and some images may generate flicker. If flicker becomes too noticeable, return to

standard speed (60 Hz/50 Hz).

*4 ITU-709 is an ITU-R BT.709 standard.

*5 Factory preset settings are The U.S.A. and Canada: SMPTE-C, Others: EBU.

*6 This feature can be displayed and set only on the BT-LH1760.

SYSTEM CONFIG

Sub menu Settings Description

CONT./BACK.

BACKLIGHT

CONTRAST

Selects function to be assigned to [CONTRAST/BACKLIGHT] (front panel

knob).

<BACKLIGHT> Adjusts the BACKLIGHT.

<CONTRAST> Adjusts the CONTRAST.

BACKLIGHT

0 - 60

Adjusts LCD backlight brightness. Adjust as required by ambient

conditions.

SUB WINDOW

FULL

PART

Selects sub-window type.

<FULL> Reduces the entire images for both input signals and places them

side by side.

<PART> Cuts out the center of the images for both input signals and places

them side by side (the images are shown at their original size).

POSITION

CENTER

Positions the on-screen menu.

<CENTER> Center of the screen

<LB> Left Bottom <RB> Right Bottom

<RT> Right Top <LT> Left Top

STATUS

DISPLAY

CONTINUE

3SEC OFF

OFF

Sets display state for input signal status (on-screen menu).

<CONTINUE> Displayed at all times

<3SEC OFF> Displayed for 3 seconds after a status change.

<OFF> Not displayed.

SETUP LOAD

USER5

*1*2

USER4

*1*2

USER3

*1*2

USER2

*1*2

USER1

*1*2

FACTORY

Loads saved factory defaults (FACTORY) or user data (USER1 - USER5).

After loading user data, the screen displays the signal selected before

user data was loaded.

SETUP SAVE

USER5

USER4

USER3

USER2

USER1

Up to 5 sets of user data can be saved (J page 16).

They save menu settings and adjustments made with the picture adjusting

knob (PHASE/CHROMA/BRIGHT/CONTRAST/BACKLIGHT) except

“SETUP SAVE/SETUP LOAD.”

POWER ON

SETUP

USER5

USER4

USER3

USER2

USER1

FACTORY

LAST

Selects the settings used when the power is turned on.

<LAST> Starts in the mode used when the power was last turned off.

<FACTORY> Starts up using the factory defaults.

<USER1 - 5> Starts up using USER registered settings.

COLOR SPACE

SMPTE-C

EBU

ITU-709

Sets the studio standard color shade.

POWER SAVE

MODE

OFF

Sets the power save mode

<ON> The backlight dims when no signal (NO SIGNAL) is input for 60

seconds or longer. Signal input or menu operation will return the

backlight to its normal brightness.

BLACK DATA

INSERTION

OFF

Doubles the speed of the LCD panel.

<ON> Double speed (120 Hz/100 Hz)

<OFF> Standard speed (60 Hz/50 Hz)

View the manual for the Panasonic BT-LH1760 here, for free. This manual comes under the category Monitors and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic BT-LH1760 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Panasonic owners to provide you with a good answer.

Number of questions: 0