Panasonic BL-C101CE manual

Panasonic BL-C101CE
7.5 · 1
PDF manual
 · 4 pages
English
manualPanasonic BL-C101CE

Installation Guide

Network Camera

Model No.

BL-C101

(Wired Type)

BL-C121

(Wireless/Wired Type)
This manual is written for both the BL-C101 (Wired Type) and BL-C121 (Wireless/Wired Type). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Model number suffixes (“A”, “CE”, and “E”) are omitted from the following model numbers shown in this document, unless necessary.
BL-C101A, BL-C101CE, BL-C101E, BL-C121A, BL-C121CE, BL-C121E
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place the
camera for regular use.
•The Setup Guide describes how to set up the camera so that it can be accessed using a PC.
Refer to the Operating Instructions on the CD-ROM for details regarding the camera’s features.
Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.
Abbreviations
UPnP is the abbreviation for “Universal Plug and Play”.
The Network Camera is referred to as “the camera” in this document.
The Setup CD-ROM is referred to as “the CD-ROM” in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation
1. Confirm the following items are included in the camera’s packaging.
2. You will need the following additional items to install and configure the camera.
a PC (see the system requirements in the Important Information document)
For BL-C101: 2 LAN cables (CAT-5 straight cable)
For BL-C121: a LAN cable (CAT-5 straight cable)
a router
Preparation
Confirm that you have all the
items required for installation.
Camera Diagram
Make sure you know the names
of the camera’s physical
features.
Connections
Connecting the camera to your
network and to the power outlet.
Setup
Setting up the camera
(described in the included Setup
Guide). This involves configuring
the camera so that it can be
accessed from a PC.
Mounting
Mounting or placing the camera.
Main Unit (1 pc.)
The appearance of your
camera depends on which
model you have purchased.
Screw A BL-C101 (6 pcs.)/BL-C121
(4 pcs.)
Order No. XTB4+20AFJ
Used for wall mounting the camera.
Washer S (1 pc.)
Order No. XWG26D12VW
Used when securing the safety
wire to the camera.
AC Adaptor (1 pc.)
Order No. PQLV206Y
Cord Length: About 3 m
(9 feet 10 inches)
BL-C101A/BL-C121A
Screw B (1 pc.)
Order No. XTB26+10GFJ
Used for securing the safety wire to
the camera.
Washer L (1 pc.)
Order No. XWG4F16VW
Used when securing the safety
wire to the wall.
Order No. PQLV216CE1Z
Cord Length: About 3 m
(9 feet 10 inches)
BL-C101CE/BL-C101E/BL-
C121CE/BL-C121E
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera when wall
mounting it.
Flexible Stand (1 pc.)
Order No. PNKL1008Z
Used to attach the camera to the
wall.
AC Cord (1pc. for BL-
C101CE/BL-C101E/BL-
C121CE/BL-C121E)
Order No. PFJA02A006Z
Cord Length: About 1.8 m
(5 feet 11 inches)
BL-C101CE/BL-C121CE
Important Information (1 pc.)
Installation Guide
(this document) (1 pc.)
Setup Guide (1 pc.)
Setup CD-ROM (1 pc.)
Order No. PQQX15704MCD
Contains the Setup Program
needed to configure the camera,
as well as the camera’s
documentation.*
*See the included Important Information
for a description of each document.
Order No. PSJA1106Z
Cord Length: About 1.8 m
(5 feet 11 inches)
BL-C101E/BL-C121E
BL-C101 Only
BL-C101 BL-C121
© Panasonic Communications Co., Ltd. 2008
PNQX1566YA KK0908CM1108
Please read this document before using the product, and save this document for future
reference. Panasonic Network Camera Website:
http://panasonic.net/pcc/products/netwkcam/
Indoor Use Only
Power Transfer Unit (1 pc.)
Order No. PNWP3C160A
Used to power the camera.

View the manual for the Panasonic BL-C101CE here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic BL-C101CE or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Panasonic owners to provide you with a good answer.

Number of questions: 0

General
Panasonic
BL-C101CE | BL-C101CE
Security camera
5025232470785, 5711045057762, 5025232391943
English
User manual (PDF)
Video
Maximum resolution640 x 480 pixels
Camera
Lens viewing angle, horizontal45 °
Lens viewing angle, vertical58 °
Minimum illumination5 lx
Lens system
Digital zoom10 x
Image sensor
Sensor typeCMOS
Optical sensor size1/4 "
Audio
Built-in microphone
Other features
Networking featuresFast Ethernet
Dimensions (WxDxH)85 x 27 x 85 mm
I/O ports1 x RJ-45
Power requirements220-240V AC
Weight & dimensions
Weight100 g
Power
Power consumption (typical)2.8 W
Operational conditions
Operating temperature (T-T)5 - 40 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic BL-C101CE below.

Is your question not listed? Ask your question here

No results