Palsonic TFTV490 PBHD manual

Palsonic TFTV490 PBHD
5.7 · 1
PDF manual
 · 35 pages
English
manualPalsonic TFTV490 PBHD

Connections (Continued)

11

Connecting an HDMI device

Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device.

To play from the device using HDMI:

How to connect a device using HDMI Connection:

1. Turn on your TV, then press SOURCE button. The Input Source menu opens.
2. Press 5or6to select HDMI, then press OK to confirm.
3. Turn on your device and set it to the correct mode. See the device’s user guide for more information.
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio
cable to the D-SUB AUDIO IN jack on the TV rear.
Note
HDMI cable
HDMI output
Equipment with

TV Right Side

Connecting a VCR (for Recording)

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

How to connect:

1. Turn on your TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.

To record program

! Only analog TV programs, and AV input sources can be output through the AV output jacks.
Note
TV Right Side
S-VIDEO
AV cable
VCR for Recording
Cables are often color-coded to
connectors. Connect red to red,
white to white, etc.

Manual

View the manual for the Palsonic TFTV490 PBHD here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Palsonic TFTV490 PBHD or do you need help? Ask your question here

Need help?

Do you have a question about the Palsonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Palsonic TFTV490 PBHD specifications

Below you will find the product specifications and the manual specifications of the Palsonic TFTV490 PBHD.

General
BrandPalsonic
ModelTFTV490 PBHD
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Palsonic TFTV490 PBHD below.

What's the best viewing distance for my Palsonic television?

The ideal viewing distance for your Palsonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Palsonic TFTV490 PBHD available in English?

Yes, the manual of the Palsonic TFTV490 PBHD is available in English .

Is your question not listed? Ask your question here

No results