Palsonic TFTV1950DT manual

Palsonic TFTV1950DT
7.6 · 1
PDF manual
 · 50 pages
English
manualPalsonic TFTV1950DT

DVB-T Setup

40

A/V Setting

1. Bright & Contrast
Select the Bright & Contrast, press the buttons to adjust the value.
2. Saturation
Select the Saturation, press the buttons to adjust the value.
3. Conversion
Select the Conversion, press the button to enter, then press the buttons to select 16 :9,
4: 3 LB or 4 :3 PS. Press ENTER button to confirm and return. Press the EXIT button to
return.
This item is used to set the audio and video items.
Press the buttons to select A/V Setting, press
the ENTER button to enter, the screen will display as
left.
In the menu, press the buttons to select
items, press the buttons to adjust or enter.
Press the EXIT button to return.
Advance Setting
Press the button to select Advance Setting, press the ENTER button to enter, the screen will
display as below:
In the menu, use the number buttons to input the pin code,
press the ENTER button to confirm.
The default code is: 888888
When input the PIN code, press the ENTER button to enter the menu shown on the below:
In the menu, press the button to select desired item.
Press the EXIT button to return.
CensorShip
Restore Setting
Clear Channels
Change Pin Code
? ENTER-Confirm EXIT-Cancel
Advanced Setting
Pin Code
? ENTER-Confirm EXIT-Cancel
Enter Pin Code
Saturation
Bright&Contrast
? ENTER-Confirm EXIT-Cancel
A/V Setting
50%
45%
16:9
Conversion

Manual

View the manual for the Palsonic TFTV1950DT here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Palsonic TFTV1950DT or do you need help? Ask your question here

Need help?

Do you have a question about the Palsonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
M
Melissa February 25, 2023

My combo tv/dvd palsonic isn't picking up any channels when I plug in put aerial cord in and I auto tune but when finished it hasn't picked up any channels. Can anyone please help me. Thanks

Palsonic TFTV1950DT specifications

Below you will find the product specifications and the manual specifications of the Palsonic TFTV1950DT.

General
BrandPalsonic
ModelTFTV1950DT
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Palsonic TFTV1950DT below.

What's the best viewing distance for my Palsonic television?

The ideal viewing distance for your Palsonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Palsonic TFTV1950DT available in English?

Yes, the manual of the Palsonic TFTV1950DT is available in English .

Is your question not listed? Ask your question here

No results