Palsonic TFTV1950DT manual

Palsonic TFTV1950DT
7.6 · 1
PDF manual
 · 50 pages
English
manualPalsonic TFTV1950DT

DVD Playback

24

Preparation:

Disc Loading Steps:
1.
2.
3.
4.
Connect the unit to the power supply and press the POWER to turn on the unit.
Press the SOURCE button and select DVD mode.
Handing the disc with its printed side outward vertically to the disc tray and gently insert the
disc into the disc tray.
The disc will draw into the unit and load automatically.
Warning: Do not play poor quality discs that may damage the player's lens.

DVD Playback

Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don't match, the disc cannot be played. This player's default code is region 4.
Play
After loading a DVD disc, disc menu will appear an the screen if the disc includes the menu. Press
the PLAY button to start playback.
Stop
During playback, press the STOP button once to stop playback and press the PLAY button to
resume normal playback. Press this button twice repeatedly to stop playback completely.
Pause
During playback, press the PAUSE button once to pause the playback; press it repeatedly to start
step-by step playback. Press the PLAY button to resume normal playback.
Previous and Next
Press the Previous button to go to the next chapter. Press the Next button once to return to
the beginning of the current chapter or track; press it twice to go to the previous chapter.

Manual

View the manual for the Palsonic TFTV1950DT here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Palsonic TFTV1950DT or do you need help? Ask your question here

Need help?

Do you have a question about the Palsonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
M
Melissa February 25, 2023

My combo tv/dvd palsonic isn't picking up any channels when I plug in put aerial cord in and I auto tune but when finished it hasn't picked up any channels. Can anyone please help me. Thanks

Palsonic TFTV1950DT specifications

Below you will find the product specifications and the manual specifications of the Palsonic TFTV1950DT.

General
BrandPalsonic
ModelTFTV1950DT
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Palsonic TFTV1950DT below.

What's the best viewing distance for my Palsonic television?

The ideal viewing distance for your Palsonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Palsonic TFTV1950DT available in English?

Yes, the manual of the Palsonic TFTV1950DT is available in English .

Is your question not listed? Ask your question here

No results