Ozito PXCLMS-018 manual

Ozito PXCLMS-018
7.5 · 1
PDF manual
 · 6 pages
English
manualOzito PXCLMS-018

BRUSHLESS

LAWN MOWER

ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V
Cutting Diameter: 300mm
Cutting Heights: 30, 50 & 70mm
No Load Speed: 3,300/min
Grass Catcher: 25 litres
Weight (Tool Only): 8.57kg

PXCLMS-018

Brushless Lawn MowerSafety Key
ozito.com.au

STANDARD EQUIPMENT

WARRANTY

0518
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being void.• If the tool has been operated on a supply voltage other
than that specied on the tool.• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.• Failure to perform maintenance as set out within the instruction manual.• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: grass catcher,
wheels, blade, cord clips, bearings etc..
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

View the manual for the Ozito PXCLMS-018 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Ozito PXCLMS-018 or do you need help? Ask your question here

Need help?

Do you have a question about the Ozito and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 11
N
Naomi HoltringDecember 8, 2023

The mowers stops, sometimes when a clump is stuck. I turn off the mower, remove the clump, but it won't restart. What to do please.

2 comments
G
GaelMarch 6, 2024

@Naomi Holtrinet Get in touch with the company via their website,Contact or Help? I had a different problem but got a satisfactory reply within 2 days.

J
John Nieuwenhof March 15, 2024

@Naomi Holtring sometimes just stops and and starts again

V
Virginia CrowleyFebruary 25, 2024

The batteries aren’t charging how long do you leave the small and large battery on charge? As I left them charging for 24 hours regards

1 comment
G
GaelMarch 6, 2024

@Virginia Crowley Small one should charge about 40 min,after initial charge which could be much longer.When battery put in make sure that the light to the R of battery is red. If not,reinsert it.You should see the light behind the battery progressing to the R as it charges.When full charged the light to the R of the battery,from the front would be green.Any probs? get in touch via the CONTACT or Help tab on the website

N
NicoleneJune 10, 2024

How do you switch on the mower

W
wendy spencerJanuary 17, 2024

How do you know if battery is charged I have no instructions

How do you know if battery is charged I have no instructions
zoom-in
View photo
G
Gael SquierMarch 3, 2024

How do I get the safety key out?Previously fine but cannot do so now!

2 comments
G
GaelMarch 6, 2024

@Gael Squier

G
Gael March 6, 2024

@Gael Squier Ozito answered within days warranty applies

G
graham lobbFebruary 9, 2024

batteries fully charged safety key properly inserted mower won't start. What can I do ?

1 comment
G
Gael March 6, 2024

@graham lobb Get in touch with the company re the contact tab .I got my response within 2 days. :-)

M
Marcus ThorpDecember 23, 2023

Should I remove the batteries and safety key when mower is not in use

1 comment
G
GaelMarch 6, 2024

@Marcus Thorp remove both and fully charge batteries

P
Paul February 22, 2024

Where is the Safety Key located? PXCLMS-018

1 comment
G
GaelMarch 6, 2024

@Paul Above the place where you slide the battery in there is a small slot.

V
Vanessa March 16, 2024

How do I start the mower please, I can’t find the manual.

H
Helen Stewart-CrawfordFebruary 19, 2022

Mower won't start Battery fully charged

3 comments
F
FeeJanuary 15, 2024

Did anyone answer this question?

G
graham lobbFebruary 9, 2024

@Fee my mower won't start

G
GaelMarch 6, 2024

@Helen Stewart-Crawford Get in touch via the contact key on their website .I had a different problem but go the answer within 2 days.

The Ozito PXCLMS-018 is a lawnmower designed for residential use. It is powered by a 36V lithium-ion battery, providing sufficient power for efficient grass cutting. The lawnmower features a 370mm cutting width, allowing for a wide mowing path. This enables users to cover more ground in less time. With a single lever, the cutting height can be easily adjusted to suit individual preferences. This feature ensures flexibility in maintaining the desired grass length. The lawnmower is equipped with a 40L grass catcher, reducing the need for frequent emptying during mowing sessions. In terms of mobility, the Ozito PXCLMS-018 is designed with large rear wheels to enhance maneuverability and stability. This allows users to navigate varying terrains with ease. The lawnmower also features a foldable handle, making it compact and easier to store. Furthermore, the Ozito PXCLMS-018 boasts a brushless motor, providing a longer lifespan compared to conventional motors. It is also designed to minimize noise levels, ensuring a quieter mowing experience. Overall, the Ozito PXCLMS-018 is a reliable and durable lawnmower suitable for residential use. Its battery-powered operation, adjustable cutting height, and large grass catcher make it a practical choice for maintaining a well-manicured lawn.

General
BrandOzito
ModelPXCLMS-018
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ozito PXCLMS-018 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I adjust the cutting height of the Ozito PXCLMS-018 lawnmower?

To adjust the cutting height of the Ozito PXCLMS-018 lawnmower, follow these steps: 1. Place the lawnmower on its side, ensuring that the blade is facing away from you and any bystanders. 2. Locate the wheel axle on the underside of the mower housing. 3. Pull the wheel axle towards the front of the mower to release it from its current position. 4. Choose the desired cutting height adjustment position by aligning the wheel axle with the corresponding slot on the mower housing. Make sure that all wheels are located in the same cutting height adjustment position. 5. Once the wheel axle is in the desired position, release it to secure it in place. 6. Repeat this process for all four wheels to ensure consistent cutting height across the entire lawnmower. 7. Check that the front, back, left, and right wheels are all set to the same cutting height adjustment position. 8. Once the cutting height is adjusted, return the lawnmower to its upright position. Remember to always wear appropriate protective gear and follow safety guidelines while operating the lawnmower. Regularly check for signs of wear or damage and replace any worn or damaged parts for safety reasons.

What should I do if the lawnmower does not start when I insert the safety key?

If the lawnmower does not start when you insert the safety key, you can try the following steps: 1. Check underneath the mower for any clogs or debris and clear them out if necessary. 2. Ensure that the battery is adequately charged. If the battery is low, charge it before attempting to start the lawnmower. 3. Make sure that the battery is inserted properly into the mower. Ensure it is securely connected. 4. If the grass is too long, raise the cutting height to reduce the starting load on the lawnmower. 5. Check if the safety key is inserted correctly. Make sure it is fitted properly and securely. 6. If the lawnmower is hard to push, it may be due to the cutting height being set too low. Adjust the cutting height to a higher setting. 7. If the cutting blade is blunt, replace it with a new one. 8. If the lawnmower continues to have issues, such as vibrating excessively or stopping while cutting, it may require further inspection or maintenance. Consider contacting customer support or a professional for assistance. Remember to always follow safety guidelines and refer to the manual for specific instructions related to your Ozito PXCLMS-018 lawnmower.

How do I remove and fit the blade of the Ozito PXCLMS-018 lawnmower?

To remove and fit the blade of the Ozito PXCLMS-018 lawnmower, follow these steps: 1. Place the lawnmower on a flat surface and ensure it is turned off. 2. Locate the blade screw on the underside of the mower housing. 3. Using a 13mm socket, loosen the blade screw by turning it anti-clockwise. You can use a piece of timber to hold the blade in place while removing the screw. 4. Remove the blade screw, washer, and blade from the mower. 5. To fit the new blade, align the lugs on the blade with the center hole on the mower housing. 6. Place the washer over the blade screw and insert it into the center hole. 7. Tighten the blade screw with a universal wrench. The recommended tightening torque is approximately 25 Nm. 8. Ensure that the blade is securely fastened and does not wobble. 9. Check that all nuts, bolts, and screws are tight to ensure the lawnmower is in a safe working condition. Remember to always wear gloves when handling the blade to avoid injury. Regularly check the blade for wear or damage and replace it as needed for optimal performance and safety.

What should I do if the lawnmower is not collecting grass properly?

If the lawnmower is not collecting grass properly, you can try the following steps: 1. Check the grass catcher frequently for wear or deterioration. Replace any worn or damaged parts for safety. 2. Ensure that the lawn is clear of sticks, stones, wire, and debris that could be thrown by the blade. 3. Before using the lawnmower and after any impact, check for signs of wear or damage and repair as necessary. 4. Make sure the blade is not worn or damaged. Replace a worn or damaged blade together with the blade bolt to maintain balance. 5. Avoid mowing in poor visibility conditions, rain, or when the grass is wet. 6. Start mowing the edge of the lawn and work along, overlapping each pass by a few centimeters for optimum grass collection. 7. Mow in a straight line and avoid swinging the lawnmower from side to side. 8. When mowing long grass, avoid overloading the motor. Start with the highest cutting height and gradually lower it to the desired height. 9. Check the cutting height adjustment positions on the underside of the mower housing. Ensure that the wheels are located in the same cutting height adjustment position for consistent cutting height. 10. Adjust the cutting height to the desired position using the wheel axle. By following these steps, you should be able to improve the grass collection performance of your Ozito PXCLMS-018 lawnmower.

How do I clean and maintain the Ozito PXCLMS-018 lawnmower?

To clean and maintain the Ozito PXCLMS-018 lawnmower, follow these steps: 1. Regularly check the grass catcher for wear or deterioration. Replace any worn or damaged parts for safety. 2. Inspect the blades, blade bolts, and cutter assembly before each use. Replace worn or damaged blades and bolts in sets to maintain balance. 3. Remove any stones, sticks, wires, bones, or other foreign objects from the mowing area before operation to prevent them from being thrown by the blade. 4. Avoid mowing in wet grass whenever possible to prevent clogging and damage to the lawnmower. 5. Wear substantial footwear and long trousers while mowing to protect yourself from debris. 6. Keep the lawnmower on a flat surface and ensure it is turned off before performing any maintenance tasks. 7. Tighten all nuts, bolts, and screws to ensure the lawnmower is in a safe working condition. 8. Clean the lawnmower after each use by removing grass clippings and debris from the housing, wheels, and blade area. 9. Store the lawnmower in a well-ventilated room away from naked flames or other potential hazards. By following these steps, you can ensure the proper cleaning and maintenance of your Ozito PXCLMS-018 lawnmower, which will help prolong its lifespan and maintain its performance.

Is the manual of the Ozito PXCLMS-018 available in English?

Yes, the manual of the Ozito PXCLMS-018 is available in English .

Is your question not listed? Ask your question here

No results