View the manual for the Outdoorchef Auckland 4+ G here, for free. This manual comes under the category ovens and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Outdoorchef Auckland 4+ G or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Outdoorchef Auckland 4+ G.
| Brand | Outdoorchef |
| Model | Auckland 4+ G |
| Product | oven |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Outdoorchef Auckland 4+ G below.
That's correct. The fan of the cooling system keeps running until the temperature of the oven has dropped sufficiently.
When the grill position of the oven is used, the top element of the oven will heat up. The grill mode is used for grilling and to give dishes a nice dark crust.
For the best preparation of a recipe, the oven should always be preheated to the recommended temperature.
Burnt-on grease is best removed with an oven cleaner spray. Spray the inside of the oven and leave it on for about 30 minutes. The oven can then be cleaned with warm water.
Oven grills are best cleaned with a scouring sponge under a hot tap.
To troubleshoot if the main burners of your Outdoorchef Auckland 4+ G oven do not light within 3 seconds of pressing the ignition button, follow these steps: 1. Ensure all gas connections are tightly secured between the gas hose, gas pressure regulator, and gas bottle. 2. Open the barbecue lid and the gas supply at the gas bottle. 3. Press and turn the gas regulating knob to the ignition setting, then press the black ignition button and hold it until the gas ignites. 4. If the gas does not light within 3 seconds, turn the gas regulating knob to off, wait 2 minutes, and repeat the ignition process. 5. If unsuccessful after 3 attempts, investigate potential causes as outlined in the troubleshooting section of the manual.
To troubleshoot if the side burner of your Outdoorchef Auckland 4+ G oven does not light after 3 attempts, follow these steps: 1. Ensure all gas connections are tightly secured between the gas hose, gas pressure regulator, and gas bottle. 2. Open the gas supply at the gas bottle and remove the granite cover from the side burner. 3. Press and turn the gas regulating knob marked SIDE BURNER to the ignition setting. 4. Press and hold the ignition button until the gas ignites. 5. If the gas does not light within 3 seconds, turn the gas regulating knob to off, wait 2 minutes, and repeat the ignition process. 6. If the side burner still does not light after 3 attempts, investigate possible causes as outlined in the troubleshooting section of the manual.
Yes, the manual of the Outdoorchef Auckland 4+ G is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Outdoorchef and is the answer not in the manual?
Question and answer
Number of questions: 0