1.Ne pas immerger l’appareil dans l’eau. Si l’appareil entre en
contact avec de l’eau, l’essuyer à l’aide d’un chiffon doux non
pelucheux de nuite.
2.Ne pas nettoyer l’appareil avec des produits abrasifs ou corrosifs.
3.Ne pas soumettre l’appareil à des excès de force, chocs, poussière,
température et humidité. Ceci risque de résulter en fonctionnement
défectueux, réduction de la vie du circuit électronique, piles
défectueuses ou éléments déformés.
4.Ne pas toucher aux éléments internes de l’appareil. Ceci annulerait
la garantie et risque de causer des dégâts. L’appareil ne renferme
aucune partie réparable par l’utilisateur.
5.N’utiliser que des piles neuves du type indiqué dans ce livret. Ne
pas mélanger piles neuves et piles usagées, car les piles usagées
risquent de fuir.
Lire attentivement ce livret d’instructions avant d’utiliser
l’appareil.
ATTENTION
—Le contenu de ce livret est susceptible de modifications
sans avis préalable.
—En raison des restrictions imposées par l’impression, les
affichages figurant dans ce livret peuvent différer de ceux
du produit.
—Le fabricant et ses fournisseurs déclinent toute
responsabilité envers vous ou toute tierce personne pour
tout dommage, pertes de bénéfices ou toute autre
revendication résultant de l’utilisation de ce produit.
—Le contenu de ce livret ne peut être reporduit sans
60 cm
60 cm
(24 pouces)
(24
pouces)
6 m
(20 pied)
View the manual for the Oregon Scientific PE319 here, for free. This manual comes under the category pedometers and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Oregon Scientific PE319 or do you need help? Ask your question here
Need help?
Do you have a question about the Oregon Scientific and is the answer not in the manual?
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Oregon Scientific PE319 below.
How much should I exercise as an adult per week?
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
How do I reset the step count on the Oregon Scientific PE319 pedometer?
To reset the step count on the Oregon Scientific PE319 pedometer, follow these steps:
1. Press the [MODE] button until the step display mode is selected.
2. Press the [RESET] button to clear the step count. Note that clearing the step count will also clear the total distance and calorie values.
3. To confirm the reset and exit the setting mode, press the [MODE] button again.
By following these steps, you will be able to reset the step count on the Oregon Scientific PE319 pedometer.
Why is the LCD display not working on my Oregon Scientific PE319 pedometer?
There could be several reasons why the LCD display is not working on your Oregon Scientific PE319 pedometer. Here are some troubleshooting steps you can try:
1. Check the batteries: Ensure that the batteries are properly installed and have enough power. If the batteries are low or exhausted, replace them with new ones.
2. Reset the pedometer: Press and hold the [RESET] button for a few seconds to reset the pedometer. This may help resolve any temporary issues with the display.
3. Check for any physical damage: Inspect the pedometer for any visible damage, such as a cracked or broken LCD screen. If there is physical damage, it may require repair or replacement.
4. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Oregon Scientific customer support for further assistance. They can provide specific troubleshooting steps or arrange for repair or replacement if necessary.
By following these steps, you can troubleshoot and potentially resolve the issue with the LCD display on your Oregon Scientific PE319 pedometer.
How do I change the sensitivity setting on the Oregon Scientific PE319 pedometer?
To change the sensitivity setting on the Oregon Scientific PE319 pedometer, follow these steps:
1. Press the [MODE] button until the step display mode is selected.
2. Hold the [MODE] button for two seconds. The weight and stride distance will be displayed, with the stride distance blinking.
3. Use the [+] or [-] button to enter the desired value for the stride distance.
4. Press the [MODE] button. The weight value will blink.
5. Use the [+] or [-] button to enter the desired value for the weight.
6. Press the [MODE] button to confirm and exit the setting mode.
By following these steps, you can adjust the sensitivity of the Oregon Scientific PE319 pedometer to motion. Experiment with different settings to find the proper amount of motion sensitivity for your walking pattern.
Why is the panic alarm not working on my Oregon Scientific PE319 pedometer?
There could be several reasons why the panic alarm is not working on your Oregon Scientific PE319 pedometer. Here are some possible causes and troubleshooting steps:
1. Check the panic alarm pin: Ensure that the panic alarm pin is properly attached to the pedometer. If it is loose or detached, reattach it securely.
2. Test the panic alarm function: Detach the panic alarm pin from the pedometer to activate the alarm. If the alarm does not sound, check the battery level and replace the 12V alkaline battery if necessary.
3. Verify the motion sensitivity setting: The motion sensitivity switch on the pedometer adjusts the sensitivity to motion. Make sure the switch is set to an appropriate level for your walking pattern. Experiment with different settings to find the optimal sensitivity.
4. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Oregon Scientific customer support for further assistance. They can provide specific troubleshooting steps or arrange for repair or replacement if necessary.
By following these steps, you can troubleshoot and potentially resolve the issue with the panic alarm on your Oregon Scientific PE319 pedometer.
How do I replace the batteries on the Oregon Scientific PE319 pedometer?
To replace the batteries on the Oregon Scientific PE319 pedometer, follow these steps:
1. Open the battery compartment door located on the back of the pedometer.
2. Insert two LR43 size batteries and one 12V alkaline battery into the designated slots in the battery compartment.
3. Ensure that the batteries are inserted correctly, following the polarity markings inside the compartment.
4. Close the battery compartment door securely.
5. If the low-battery indicator is illuminated, it indicates that the LR43 batteries are running low and need to be replaced.
6. Dispose of the exhausted batteries properly at authorized disposal stations to protect the environment.
By following these steps, you can easily replace the batteries on your Oregon Scientific PE319 pedometer. Make sure to use the specified battery types and dispose of old batteries responsibly.
Is the manual of the Oregon Scientific PE319 available in English?
Yes, the manual of the Oregon Scientific PE319 is available in English .
Need help?
Do you have a question about the Oregon Scientific and is the answer not in the manual?
Question and answer
Number of questions: 0