Optoma ProScene X605 manual

Optoma ProScene X605
8.5 · 1
PDF manual
 · 101 pages
English
manualOptoma ProScene X605

English

20

Powering Off the Projector

1. Press POWER to turn off the projector lamp, a message displays on the
projector’s screen.
2. Press POWER again to conrm, otherwise the message disappears
after 15 seconds.
3.
The cooling fans continue to operate for about 180 seconds for
cooling cycle
and the Power Led will turn blue. When the light is
solid red, the projector has entered standby mode.
(If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press POWER to restart the
projector.)
4. Turn off the main power switch. Disconnect the power cord from
the electrical outlet and the projector.
5. Do not turn on the projector immediately following a power off
procedure.

Warning Indicator

v When the LAMP LED indicator lights red, the projector will
automatically shut itself down. Please contact your local reseller
or service center. See pages 79-80.
v When the TEMP LED is on a steady (not ashing) red, the
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it has
cooled down. If the problem persists, you should contact your
local dealer or our service center. See pages 79-80.
v When the TEMP LED ashes red, it indicates the fan has failed.
Please contact your local dealer or our service center. See pages
79-80.

Installation

Manual

View the manual for the Optoma ProScene X605 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Optoma ProScene X605 or do you need help? Ask your question here

Need help?

Do you have a question about the Optoma and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Optoma ProScene X605 specifications

Below you will find the product specifications and the manual specifications of the Optoma ProScene X605.

General
BrandOptoma
ModelProScene X605 | E1P1D0K1E031
Productvideo projector
EAN5060059048373
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projection technologyDLP
Projector brightness6000 ANSI lumens
Projector native resolutionXGA (1024x768)
Native aspect ratio4:3
Contrast ratio (typical)2000:1
Supported aspect ratios4:3, 16:9
Matrix size0.7 "
Horizontal scan range15 - 91 kHz
Vertical scan range24 - 85 Hz
Keystone correction, vertical-40 - 40 °
Uniformity85 %
Number of colors16.78 million colors
Projection distance- m
Screen size compatibility- "
Video
Analog signal format systemNTSC, PAL, SECAM
Supported video modes480i, 480p, 540p, 576i, 576p, 625i, 720p, 1080i, 1080p
3DYes
Full HD-
Supported graphics resolutions640 x 480 (VGA),720 x 480,720 x 576,800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1600 x 1200 (UXGA),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Ports & interfaces
HDMI version1.4a
VGA (D-Sub) ports quantity3
HDMI ports quantity1
HDMI connector typeFull-size
DVI portYes
AC (power) inYes
DisplayPorts quantity1
BNC input ports5
12V triggerYes
Component video (YPbPr/YCbCr) in1
Composite video in1
S-Video inputs quantity1
Audio (L/R) in2
USB 2.0 ports quantity1
USB 2.0 Type-B ports quantity1
PC Audio outYes
PC Audio inYes
Serial interface typeRS-232
Light source
Lamp power370 W
Lamps quantity1 lamp(s)
Lamp typeUHP
Service life of light source1500 h
Service life of light source (economic mode)3500 h
Light source typeLamp
Lens system
Horizontal lens shift range-5 - 5 %
Vertical lens shift range-10 - 10 %
Throw ratio0.8:1
Focal length range- mm
Features
HDCPYes
Noise level37 dB
CertificationWEEE, CE, TUV-GS, CB
On Screen Display (OSD) languagesARA, DEU, DUT, ENG, ESP, FAS, FRE, ITA, POL, POR
Other features
RS-232 ports1
Network
Ethernet LAN (RJ-45) ports1
Smart TVNo
Ethernet LANYes
Wi-FiNo
Storage
Card reader integratedNo
Weight & dimensions
Weight8600 g
Width431 mm
Depth341 mm
Height183 mm
Power
Power sourceAC
AC input voltage100-240 V
AC input frequency50-60 Hz
Power consumption (max)460 W
Power consumption (standby)0.5 W
Operational conditions
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)0 - 85 %
Operating altitude0 - 3000 m
Technical details
Sustainability certificatesRoHS
Design
Cable lock slotYes
Cable lock slot typeKensington
Product colorBlack, White
Product typeLarge venue projector
PlacementDesktop, Ceiling
Multimedia
Built-in speaker(s)Yes
RMS rated power3 W
Number of built-in speakers1
Packaging content
Handheld remote controlYes
Remote control typeIR
Batteries includedYes
Quick start guideYes
Warranty cardYes
Cables includedAC, VGA
Display
Built-in displayNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Optoma ProScene X605 below.

What is the weight of the Optoma ProScene X605?

The Optoma ProScene X605 has a weight of 8600 g.

What certifications does the Optoma ProScene X605 have?

The Optoma ProScene X605 has the following certifications: WEEE, CE, TUV-GS, CB.

What is the height of the Optoma ProScene X605?

The Optoma ProScene X605 has a height of 183 mm.

What is the width of the Optoma ProScene X605?

The Optoma ProScene X605 has a width of 431 mm.

What is the depth of the Optoma ProScene X605?

The Optoma ProScene X605 has a depth of 341 mm.

Is the manual of the Optoma ProScene X605 available in English?

Yes, the manual of the Optoma ProScene X605 is available in English .

Is your question not listed? Ask your question here

No results