View the manual for the Optoma EH461 here, for free. This manual comes under the category video projectors and has been rated by 2 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Optoma EH461 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Optoma EH461.





| Brand | Optoma |
| Model | EH461 | E1P1D0YWE1Z1 |
| Product | video projector |
| EAN | 5055387660250 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Projection technology | DLP |
| Projector brightness | 5000 ANSI lumens |
| Projector native resolution | 1080p (1920x1080) |
| Contrast ratio (typical) | 20000:1 |
| Native aspect ratio | 16:9 |
| Supported aspect ratios | 4:3, 16:9 |
| Keystone correction, horizontal | -25 - 25 ° |
| Keystone correction, vertical | -30 - 30 ° |
| Horizontal scan range | 15.375 - 91.146 kHz |
| Vertical scan range | 24 - 85 Hz |
| Uniformity | 75 % |
| Projection distance | 1.23 - 5.63 m |
| Screen size compatibility | - " |
| Lamps quantity | 1 lamp(s) |
| Lamp power | 285 W |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 3500 h |
| Light source type | Lamp |
| Throw ratio | 1.22 - 1.46:1 |
| Zoom ratio | 1.2:1 |
| Zoom capability | Yes |
| Focal length range | 16.87 - 21.87 mm |
| Offset | 115 % |
| Zoom type | Manual |
| HDMI ports quantity | 2 |
| VGA (D-Sub) ports quantity | 2 |
| AC (power) in | Yes |
| HDMI version | 1.4a |
| PC in (D-Sub) | Yes |
| PC Audio in | Yes |
| PC Audio out | Yes |
| HDMI connector type | Full-size |
| 12V trigger | Yes |
| USB 2.0 ports quantity | 2 |
| S-Video inputs quantity | 0 |
| Audio (L/R) in | 0 |
| Component video (YPbPr/YCbCr) in | 0 |
| Composite video in | 1 |
| DVI port | No |
| Mobile High-Definition Link (MHL) | Yes |
| Serial interface type | RS-232C |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Wi-Fi | No |
| RS-232 ports | 1 |
| RS-232C | Yes |
| 3D | Yes |
| Full HD | Yes |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080) |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC 3.58, NTSC 4.43, NTSC J, NTSC M, PAL 4.43, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM 4.25/4.4, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Supported 3D formats | Frame packing, Side by side |
| Noise level (economic mode) | 29 dB |
| Noise level | 31 dB |
| Password protection | Yes |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE |
| On Screen Display (OSD) | Yes |
| Cable lock slot | Yes |
| Cable lock slot type | Kensington |
| Product color | White |
| Product type | Standard throw projector |
| Placement | Desktop |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Operating altitude | 0 - 3000 m |
| Handheld remote control | Yes |
| Built-in speaker(s) | Yes |
| Number of built-in speakers | 1 |
| RMS rated power | 10 W |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (max) | 350 W |
| Weight | 2950 g |
| Package weight | 4130 g |
| Width | 345 mm |
| Depth | 216 mm |
| Height | 109 mm |
| Package width | 317 mm |
| Package depth | 233 mm |
| Package height | 433 mm |
| Card reader integrated | No |
| Built-in display | No |
| Harmonized System (HS) code | 85286200 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Optoma EH461 below.
The Optoma EH461 has a weight of 2950 g.
The Optoma EH461 has a height of 109 mm.
The Optoma EH461 has a width of 345 mm.
The Optoma EH461 has a depth of 216 mm.
Yes, the Optoma EH461 has a projector brightness of 5000 ANSI lumens. This is considered high and provides a bright and vibrant display, even in well-lit environments.
Yes, the Optoma EH461 has a contrast ratio of 20000:1. This is a relatively high contrast ratio, allowing for better differentiation between black and white colors and enhancing overall image quality.
Yes, the Optoma EH461 supports both 4:3 and 16:9 aspect ratios. This allows for compatibility with various content formats, providing flexibility for different viewing preferences.
The service life of the light source in the Optoma EH461 is 2500 hours in normal mode and 3500 hours in economic mode. While this is decent, there are projectors available with longer lamp lifespans, which may be preferable for users seeking extended usage times.
The Optoma EH461 has 2 HDMI ports. This provides convenient connectivity options, allowing users to connect multiple devices such as laptops, gaming consoles, or Blu-ray players simultaneously.
To adjust the controls on the Optoma EH461 video projector, follow these steps: 1. Locate the control panel on the projector. It is usually located on the top or front of the device. 2. Press the power button to turn on the projector. Wait for it to initialize. 3. Use the arrow buttons or navigation wheel to navigate through the menu options displayed on the projector's screen. 4. Press the "Enter" or "OK" button to select a menu option or confirm a setting. 5. To adjust the volume, locate the volume control buttons on the control panel. Press the "+" button to increase the volume and the "-" button to decrease it. 6. If the projector has a zoom feature, use the zoom control buttons to adjust the zoom level of the projected image. 7. Some projectors may have additional controls for adjusting picture settings, such as brightness, contrast, and color. Refer to the manual for specific instructions on accessing and adjusting these settings. By following these steps, you will be able to adjust the controls on the Optoma EH461 video projector to suit your preferences and needs.
If the controls on the Optoma EH461 video projector are not responding, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the projector is properly connected to a power outlet and that the power cable is securely plugged in. If the projector is running on battery power, make sure the battery is charged. 2. Check the remote control: If you are using the remote control to operate the projector, check the batteries and replace them if necessary. Ensure that there are no obstructions between the remote control and the projector. 3. Check the control panel: If the controls on the projector itself are not responding, make sure that the control panel is not locked. Some projectors have a control panel lock feature to prevent accidental button presses. Refer to the manual for instructions on how to unlock the control panel. 4. Restart the projector: Turn off the projector and unplug it from the power source. Wait for a few seconds, then plug it back in and turn it on again. This can help reset the system and resolve any temporary issues. 5. Contact customer support: If the controls still do not respond after trying the above steps, it is recommended to contact Optoma customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. By following these steps, you can troubleshoot the issue of controls not responding on the Optoma EH461 video projector.
To navigate through the menu options using the controls on the Optoma EH461 video projector, follow these steps: 1. Press the "Menu" button on the control panel or remote control. This will display the main menu on the projector's screen. 2. Use the arrow buttons (Up/Down/Left/Right) on the control panel or remote control to navigate through the menu options. The arrow buttons allow you to move the selection highlight up, down, left, or right. 3. Once the desired menu option is highlighted, press the "Enter" or "OK" button to enter that menu. 4. Within each menu, use the arrow buttons to navigate through the sub-menu options or settings. 5. To select a specific setting or option, highlight it using the arrow buttons and press the "Enter" or "OK" button. 6. If there are additional sub-menus, repeat the process of using the arrow buttons to navigate and the "Enter" or "OK" button to select. 7. To exit the menu and return to the previous screen, press the "Menu" button again or use the arrow buttons to navigate to the "Exit" or "Back" option and press the "Enter" or "OK" button. By following these steps, you can easily navigate through the menu options using the controls on the Optoma EH461 video projector.
If the controls on the Optoma EH461 video projector are not working properly, you can try the following steps to troubleshoot the issue: 1. Check the batteries: If you are using the remote control, make sure the batteries are properly inserted and have enough power. Replace the batteries if necessary. 2. Clean the control panel: If the controls on the projector itself are not responding, check if there is any dirt, dust, or debris on the control panel. Use a soft, lint-free cloth to gently clean the buttons and the surrounding area. 3. Reset the projector: Turn off the projector and unplug it from the power source. Wait for a few seconds, then plug it back in and turn it on again. This can help reset the system and resolve any temporary issues. 4. Check the control settings: Access the menu options and navigate to the control settings. Make sure the controls are not disabled or locked. Adjust the settings if necessary. 5. Contact customer support: If the controls still do not work properly after trying the above steps, it is recommended to contact Optoma customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if needed. By following these steps, you can troubleshoot and resolve issues with the controls on the Optoma EH461 video projector.
To use the controls on the Optoma EH461 video projector for different functions, follow these steps: 1. Refer to page 26 of the manual titled "UseR ConTRols" for detailed instructions on using the controls for various functions. 2. On page 26, you will find information about the specific buttons and their functions on the control panel or remote control. 3. The manual will provide step-by-step instructions on how to navigate through the menu options, adjust settings such as brightness and contrast, select input sources, and control other functions of the projector. 4. It will also explain how to use specific buttons for functions like power on/off, volume control, keystone adjustment, and image zoom. 5. The manual may include diagrams or illustrations to help you understand the location and purpose of each control. By referring to page 26 of the manual titled "UseR ConTRols," you will find detailed instructions on how to use the controls on the Optoma EH461 video projector for different functions.
Yes, the manual of the Optoma EH461 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Optoma and is the answer not in the manual?
Question and answer
Number of questions: 0