View the manual for the Onkyo TX-SR508 here, for free. This manual comes under the category receivers and has been rated by 24 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Onkyo TX-SR508 or do you need help? Ask your question here
Onkyo | |
TX-SR508 | TX-SR508B | |
receiver | |
4961330029146, 4961330029153, 4961330029160 | |
English | |
User manual (PDF) |
Signal-to-Noise Ratio (SNR) | 106 dB |
Total Harmonic Distortion (THD) | 0.08 % |
Impedance | 4 Ω |
Audio output channels | 7.1 channels |
Frequency range | 5 - 100000 Hz |
Radio Data System (RDS) | ✓ |
AM band range | 522 - 1611 kHz |
FM band range | 87.5 - 108 MHz |
HDMI | ✓ |
Dimensions (WxDxH) | 435 x 151 mm |
Power requirements | AC 230 V, 50 Hz |
Package depth | 537 mm |
Package height | 268 mm |
Package width | 416 mm |
Product colour | Black |
Weight | 9400 g |
Power consumption (typical) | 450 W |
Package weight | 12000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Onkyo TX-SR508 below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Onkyo and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Onkyo owners to provide you with a good answer.
stand by mode activated now system cannot turn on
When I plug in the receiver into the socket,the HDMI thru light is on..Then when I turn on the power button the receiver shuts off immediately..An the red light stays on standby,an I push the power button again an it shuts off again an I can't use the receiver for anything..
Number of questions: 2